New carbon fiber parts from ANVil

[hotwheels]

http://i219.photobucket.com/albums/cc95/anvil_auto/1_17_08newCOWLanvil.jpg


We now have our 1st gen Camaro "Bare" cowl induction hoods available for sale as well as our vent delete cowl panels.
"Bare" hoods weigh only 17lbs. and are $1499
Vent delete cowl panels weigh a scant 1.5 lbs. and are $249 each
You can order them now before they are up on our web site by calling our toll free number 888 723-8882

Best, MaTT
ANVil
www.anvilauto.com

[protour73]

Matt..................dieing for 2nd Gen CF parts!!

[John McIntire]

geez those are beautiful!! Don't forget about us A-body folk!

[Larry Callahan]

Sweet!!!!!!!!!!

[Mr.VENGEANCE]

now theres no excuse!.. gotta get em..

hey whats up on the rear decklids?

[paulk68]

what about a cowl piece without the holes for the wiper arms. i know it might be illegal but i know some guys do not want to run the wiper arms.

[Cruiser]

The solid one with no cowl vent indents is cool as hell Matt!! I love it, your going to make me spend money!!

Joe

[hotwheels]

Thanks, guys!
Second gen parts are in the works starting with our custom 1 pc. deck hugging rear spoiler followed by deck lid, filler panel, hood and front nose pc. The 1st gen deck lid is close.The development process on this stuff takes some time to get it right, so I really appreciate everyone's patience. We will be introducing a lot of stuff in '08 including interior stuff and we now have available thin, self stick carbon fiber sheet that can be cut to shape to fit dases etc.

MaTT
ANVil

[eville]

how soon before we see those fender supports. I hate my chrome ones.

[Damn True]

Any chance of a 1st Gen base flat (no cowl) hood, and a bare (no spoiler) decklid?

[Project69]

Any chance of discount for buying hood/cowl/deck lid/spoiler for 1st gen???

[scotzilla]

do you guys make a rear spoiler?

[hotwheels]

We should have our '69 rear spoilers ready to sell next week with '67/'68 and 1 pc. second gen ready, I hope in a couple months. The first gen deck lid is close to production and we will only sell that as a separate piece, not with the spoiler attached, so it won't have the spoiler mounting holes in it if you don't want to run a spoiler.
The prototype cf and heim joint fender braces work well on the second gen, but are a bit shy on hood clearance for first gen, so I am experimenting with a smaller heim joint. I would like to go with the same set up for both and just make the first gen braces longer. I aim to have that sorted out in a few weeks.
I will give a 10% discount on an entire order of 3 or more parts at a time for anyone on this or other forums we advertise on. So, if you want 3 or more of our products, call us on our toll free number,
888 723-8882 so we can manually input your credit card info and give you the discount. This offer is not available on our web site.
Thank you for your support!

MaTT
ANVil

[paulk68]

sorry i am getting a little confused with all the people offering up carbon fiber pieces. could you make a list of what you offer and also what you will be offering in the future in a list form, this is what i know of already:

67-69 cowl hood
67-68 header panel
67-68 vent panel

thanks
paul

[TonyHuntimer]

Matt,

That's some great looking stuff!

Tony Huntimer

[Mr. B]

Can someone please explain to me the specifics of cowl vents and vent deletes? What is their function, and what enables people to delete them?

[powerjames]

That stuff looks awesome. What kind of prep is required?

[Cruiser]

Can someone please explain to me the specifics of cowl vents and vent deletes? What is their function, and what enables people to delete them?

It draws air to the vent system in that goes into the car, in a 67, 68 and 69 with kick panel vents this is where the air flow comes from, the cowl panel vents. An A/C car has kick panel vents that are covered. The air also flushes water and debris out to a certain extent. With the deletes you will still draw air from in rear of it and the windshield area since it's not closed off or sealed in this area. I suppose you could seal this new piece with a foam type seal or weatherstrip from the core support area of an A/C car to keep air and water out.

The big plus to the delete to me is it covers and area that needs covering anyway really smooths the line from the hood to windshield giving a very cool old Camaro a modern look. Most people will never notice it if it painted body color IMHO.

Joe

[Young Gun]

i think yall need to put some 3rd gen nova pieces in the works...oh yahhh

[hotwheels]

sorry i am getting a little confused with all the people offering up carbon fiber pieces. could you make a list of what you offer and also what you will be offering in the future in a list form, this is what i know of already:

67-69 cowl hood
67-68 header panel
67-68 vent panel

thanks
paul

Sure, Paul

AVAILABLE NOW
-67-69 cowl induction hood in 3 different configurations
-67-68 header panel
-69 header panel
-67-69 cowl panel in 4 different configurations (the 2 different vent delete panels not yet on our site)
-.008" thick peel and stick real carbon fiber sheet we are selling for 35 cents a square inch or $99 for a full 9.85" X 39.4" (250mm X 1000MM) sheet (not yet on our site)
-.75" OD X .67ID X 39.4" long real cabon fiber tubes for $40 each (not yet on our site)
AVAILABLE SOON
-69 Camaro rear spoilers for $395 (available later this week)
-1st Gen & 2nd Gen Camaro CF & spherical rod end fender braces
-67-69 Camaro deck lids (available in a month or 2)
-67-68 Camaro rear spoilers (available in 2-3 months)
-2nd Gen Camaro 1 pc. rear spoilers (available in 2-3 months)
-Many more 1st and 2nd Gen exterior and interior Camaro parts available in the next 6 months, then on to other cars.
STAY TUNED! www.anvilauto.com

MaTT
ANVil