Results 1 to 5 of 5
Thread: 4th gen master on 2nd gen F-body
-
01-05-2005 #1
4th gen master on 2nd gen F-body
I am working on doing this swap. Has anyone done it? The bore is 1", and I have the bubble flared lines. The pushrod on the booster needs to be lengthened. I also have Howe twin piston calipers up front, and Caddy Seville in the rear.
-
01-05-2005 #2Registered User- Join Date
- Aug 2004
- Location
- Pittsburgh, PA
- Posts
- 316
MC will not fit
When you try to bolt this together you will find out the outside diameter of the rear boss on the MC will not fit into the bore of the booster. All is not lost though some guys on NASTYZ28.com have mated the front half of a third gen booster with the back half of the stock second gen booster so they are able to use the late model MC.
Take care,
Shane
01-06-2005 #3