Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register



    Page 3 of 3 FirstFirst 1 2 3
    Results 41 to 48 of 48
    1. #41
      Join Date
      Jan 2007
      Location
      SOCAL
      Posts
      618
      Quote Originally Posted by 70 LS1
      What are you using to sand and how smooth are you getting between coats?
      wetsanding with 1000 grit...next will be 2000 as i just have to apply the last 2 coats.....the buff and polish.



    2. #42
      Join Date
      Jul 2007
      Location
      Castalia, Oh
      Posts
      2
      I just got done appling a $50 paint job to my 89 Camaro, still need to wet sand and buff, but it came out better than I thought.


    3. #43
      Join Date
      Jan 2007
      Location
      SOCAL
      Posts
      618
      nice...how is it looking...i have been super busy again, will work on it saturday...one more coat left....

    4. #44
      Join Date
      Jan 2006
      Location
      Rockford, Il
      Posts
      157
      has anybody tried this method with a 2 tone. i am planning on doing my truck in this method, using a factory scheme in black with a white. any recommendations to get a nice clean break and not feel an edge. I am thinking that i will have to paint them together, ok what i mean is coat for coat. mask off the black and paint the white, then mask the white and roll the black. any help will be appreciated. Dan

    5. #45
      Join Date
      Sep 2005
      Posts
      138
      I wonder if you could roller on a clear over the two tone?
      Jeff
      1970 Corvette
      LS1 & T56
      C5 Z06 Brakes

    6. #46
      Join Date
      Jul 2007
      Location
      Castalia, Oh
      Posts
      2
      Quote Originally Posted by 70 LS1
      I wonder if you could roller on a clear over the two tone?
      I know Rustoleum makes a clear coat, but haven't tried it myself. I guess you could try it on a scrap piece of metel and see how it looks.

    7. #47
      Join Date
      Feb 2006
      Location
      SoCal
      Posts
      1,622
      Quote Originally Posted by 71dusterdan
      has anybody tried this method with a 2 tone. i am planning on doing my truck in this method, using a factory scheme in black with a white. any recommendations to get a nice clean break and not feel an edge. I am thinking that i will have to paint them together, ok what i mean is coat for coat. mask off the black and paint the white, then mask the white and roll the black. any help will be appreciated. Dan
      You can even it out in final sand so that you don't feel the edges!

      John
      '66 Chevy II - The "NEW" '69 Camaro!

      ***Under Construction***

      Build Update Link:

      https://www.pro-touring.com/forum/sh...ad.php?t=17108

    8. #48
      Join Date
      Feb 2007
      Posts
      161
      Where is that parking lot you shot your pictures of your car at?
      Build - Drive - Destroy - Repeat

    Page 3 of 3 FirstFirst 1 2 3




    Advertise on Pro-Touring.com