Results 1 to 3 of 3
  1. #1
    Join Date
    May 2006
    Location
    Staten Island, NY
    Posts
    51
    Country Flag: Argentina

    AN fuel lines to metric sender

    Hey, all! Can anyone offer a solution to mating AN lines (-8 supply and -6 return) to a stock (metric) fuel tank sender, such as a Monte TBI or Grand National with metric flare ends? Also, what adapters to run for the stock filter, and should I use quarter turn ball valves on either side of the filter to help when replacing the filter? Thanks! Rudy

    "it's never too late to have a happy childhood!"

    Rudy M


  2. #2
    Join Date
    Dec 2003
    Location
    lost
    Posts
    2,607
    edit-my bad. The GM fittings are bump tube type, M16X1.5 on the pressure side. Most hydraulic fitting supply houses have bump tube to JIC in stock.

  3. #3
    Join Date
    May 2006
    Location
    Staten Island, NY
    Posts
    51
    Country Flag: Argentina
    Denny, thanks so much for the info, just knowing the size is a big help!! Neat car, too, BTW!!
    "it's never too late to have a happy childhood!"

    Rudy M