Results 1 to 3 of 3
Thread: AN fuel lines to metric sender
-
05-14-2006 #1
Registered User
- Join Date
- May 2006
- Location
- Staten Island, NY
- Posts
- 51
AN fuel lines to metric sender
Hey, all! Can anyone offer a solution to mating AN lines (-8 supply and -6 return) to a stock (metric) fuel tank sender, such as a Monte TBI or Grand National with metric flare ends? Also, what adapters to run for the stock filter, and should I use quarter turn ball valves on either side of the filter to help when replacing the filter? Thanks! Rudy
"it's never too late to have a happy childhood!"
Rudy M
-
05-14-2006 #2
Registered User
- Join Date
- Dec 2003
- Location
- lost
- Posts
- 2,607
edit-my bad. The GM fittings are bump tube type, M16X1.5 on the pressure side. Most hydraulic fitting supply houses have bump tube to JIC in stock.
05-16-2006 #3
Registered User
- Join Date
- May 2006
- Location
- Staten Island, NY
- Posts
- 51
Denny, thanks so much for the info, just knowing the size is a big help!! Neat car, too, BTW!!
"it's never too late to have a happy childhood!"
Rudy M
Reply With Quote
