Results 1 to 6 of 6
Thread: PN for tko 600...
-
10-17-2004 #1Registered User
- Join Date
- Aug 2004
- Posts
- 345
PN for tko 600...
i am looking for a PN for a plug that i can use for by reverse light switch on a TKO 600. thanks
-
10-19-2004 #2Registered User
- Join Date
- Aug 2004
- Posts
- 345
wow, all these views and nobdy, o well i will take a trip to the store and see what they have
-
10-19-2004 #3Registered User
- Join Date
- Aug 2004
- Location
- Encinitas, CA
- Posts
- 219
I have searched high and low for a pre-made plug for the reverse light switch and I have not found one.
I tried Ford, auto electric specialists, terminal supply company's and have had no luck.
I used a plug taken from the wiring harness of a junked 1990 Mustang (with manual transmission) and it snapped right into place. You can read my install write up to see how I handled this connection: http://www.classicchevy5speed.com/tr..._camaro_wu.htm.
I hope this helps. Sorry I did not respond sooner.Jeff Mortenson
-
10-19-2004 #4Registered User
- Join Date
- Aug 2004
- Posts
- 345
ok, i had seen that but thought there was a PN for that plug. you wouldnt happen to know what that plug was for on the mustang would you?
-
10-19-2004 #5Registered User
- Join Date
- Aug 2004
- Location
- Encinitas, CA
- Posts
- 219
The plug on the Mustang was used for the same switch - the reverse light switch on the Mustang's transmssion.
I cheked with Ford and showed to Ford part's guy's the plug and they both said that i would need to buy th eenitire wiring harness to get that plug - it is not sold as a sepearte item. If you find out differently let me know.Jeff Mortenson
-
10-19-2004 #6Registered User
- Join Date
- Aug 2004
- Posts
- 345
ok, thanks. i will try anyways, if not i will take a trip to a local junk yard
-