Viper T56 electrical connections

[Marty G Cars]

My Camaro has a Viper T56 being installed and the installer would like to get some verification as to the locations and purposes of all the electrical connections. Like the speedo sending unit and maybe the reverse light switch. Could someone please respond and tell me where each connector is and the methods that have been used to connect them?



Thanks,
Marty

[TitoJones]

I'm not too sure on a Viper box, but on the F body versions it goes as follows:

Drivers side of case, starting by the bellhousing-

First is the CAGS
2nd is the VSS
Above it is the reverse lock out
and on the pass side of the case is the reverse lights.
I use GM pig tails to wire them all up.
Tyler

[parsonsj]

My Viper box didn't have a CAGS connection. I think Vipers in general don't have it.

jp