Results 1 to 2 of 2
Thread: H2O pump ?
-
09-30-2004 #1
Registered User
- Join Date
- Aug 2004
- Posts
- 345
H2O pump ?
I have an edelbrock water pump. there is a small, 1/2 inch or so oppening on the top. in some pics i have seen a short length of heater hose running from there to the manifold, other pics i have seen this port plugged. what needs to happen. can i plug it and mount the water temp sensor (electric) in that front hole on the manifold? or do these two need to be jumped together? this is on a BBC by the way. thanks
-
09-30-2004 #2
Registered User
- Join Date
- Oct 2003
- Posts
- 277
plumbing
That is the bypass for the water pump. You can plug off the water pump and thread your temp sensor into the manifold but you must drill a few 1/8" bypass holes in your thermostat.
Tim
Reply With Quote
