Results 1 to 7 of 7
Thread: gen7 question
Threaded View
-
01-24-2006 #1
Registered User
- Join Date
- Jan 2006
- Location
- brick,new jersey
- Posts
- 28
gen7 question
to start off motor is a chevy 383...i have a gen7 steup(calmap v4) and i am trying to tune the ve table...my question is when i run a datalog and i go back to review it,there are some points on the log i can't seem to tune..for example, when vacum is say 9psi i can't seem to take any more fuel out of the ve table...i already have it as low as it will go(.100)and its still real rich..the ve table only goes as low as 13.44..i tried to adjust it to read lower but calmap tells me that the value is out of range and it also says i can't scale the first value in the map axis...is there another table that can be adjusted to solve the problem??i would appreciate any feedback...
thanks,mike
ps..injectors are 30lb/hr
-
Reply With Quote
