GM Short Spindle C5 Brake Hubs

[ryeguy2006a]

Hey guys,

I'm cleaning out some parts and have a pair of Drum hubs that came out of my 1968 Camaro that I just machined down in order to accept the C5/C6 brake rotors. The diameter was turned down to 5.90" with a 45* bevel on the outer edge. I ran this exact setup in my Camaro for several years and loved it. There are many different caliper brackets available now, but when I was running mine I had Kore3 and it worked flawlessly. You'll need to do your own research on what brackets to run and install new bearings. Asking $60 shipped.

I will also have a second pair ready to go likely within the next few weeks. I just picked up a new lathe and have been saving these hubs as a project to do with my new shop tool.



Thanks,
Ryan

[ryeguy2006a]

New price, $95 shipped!!

[ryeguy2006a]

These will work for 67-69 Camaros, 68-74 Novas and I think 64-72 Chevelles.

[ryeguy2006a]

$75 shipped!

[ryeguy2006a]

Still have these. Buy these, it's much cheaper than a machine shop!

[qwk406]

will these work with the f-body brakes?

[ryeguy2006a]

Based on the photo that is on Flynbye, I'd say that it will work. I believe the inside diameter of the LS1 and C5/C6 rotors are the same.

http://webhosting.web.com/imagelib/s...ion%20brackets

[ryeguy2006a]

Last Bump, $60 shipped. When I paid to have the hubs done on my Camaro several years ago I was charged $60 bucks!

[Mtrhd329]

Pm sent

[ryeguy2006a]

One set sold! Still have another pair of hubs, just need to be machined.