Results 241 to 254 of 254
Thread: 66 Mustang Restomod Project
-
03-22-2024 #241
-
03-22-2024 #242Registered User
- Join Date
- Mar 2009
- Location
- Salina, KS
- Posts
- 7
Great looking build. It definitely give me some good ideas for my 65 Coupe project. What vehicle applicaiton did you use for the roll cage?
-
03-22-2024 #243
-
03-22-2024 #244Registered User
- Join Date
- Mar 2009
- Location
- Salina, KS
- Posts
- 7
That's great. I had contacted them to see how the fitment was in these cars and they didn't have any pictures or info really. I was hesitant to order it without see some sort of pictures on the fit. I'd have to say it looks good and I will be ordering one before long. Thanks again.
-
03-22-2024 #245
-
03-24-2024 #246
I built a little kick out on the rear valance to clear my fuel hose fittings.
-
03-27-2024 #247
Making the underside and engine bay a different color than the outside turned out to be much more difficult than anticipated.
-
03-31-2024 #248
The front suspension is going on. I set the initial caster (3°) and camber (0°) after lots of fiddling around.
-
4 Weeks Ago #249
The front suspension is on and the sway bar has been mounted. The steering rack is also in place.
-
4 Weeks Ago #250
Got the underside of the hood finished up and painted so I could try out another color on the top. I am going to shoot it with Destroyer gray and white pearl ghost stripes.
-
4 Weeks Ago #251
really cool build.
i like
i like
i like...life is too short, live for today, tomorrow isn't guaranteed
-
4 Weeks Ago #252
-
3 Weeks Ago #253
I finally got back to finishing up the rear bumper. It wasn’t even on the back and sat up too high off the rear valance.
-
1 Week Ago #254
Ok, I welded the rear valance in place and cleaned up the rear bumper a bit.
-