Suggestions for undercar finish

[arcane73]

Hi everyone,

I've recently completed replacing the floors and part of the tunnel in my car. I scuffed everything up and sprayed uPol's epoxy primer on everything. https://u-pol.com/en-us/product/coat...oxy-primer-kit
The inside of the car will be getting lizardskin heat and sound control. What should I do with the underside of the car? I am thinking that I will at least spray the heat control directly under the seat pans but I'm looking for suggestions for the rest of the freshly primered areas.

[ARAD RS]

Hi There,

I recently shot U-Pol Raptor on my under carriage and Lizard Skin in the entire cab.
Everything looks super Fantastic.
If I need additional sound deadening or thermal barrier in the interior I can always lay down some dynamat.

[79 Camaro]

On my projects I degrease first. Scuff. Eastwood primer as needed. Then Eastwood chassis black. Then just spray bomb under coating.

[arcane73]

I ended up ordering the raptor liner in light grey.

[SPG]

I sprayed southern polyurethanes epoxy and upol black on my camaro, I think it turned out great
I also plan on spraying lizardskin in my car, can you provide pictures of what it looks like? I am interested in seeing

[arcane73]

I sprayed southern polyurethanes epoxy and upol black on my camaro, I think it turned out great
I also plan on spraying lizardskin in my car, can you provide pictures of what it looks like? I am interested in seeing

This is the only one i have at the moment. It's not the best pic. This is the Sound Control. I'll be spraying the ceramic insulation next weekend.

[arcane73]

This was after both coats of both the LizardSkin heat and sound control were done.

[SPG]

how many gallons did you use?

[arcane73]

how many gallons did you use?

2 gallons of each. But I only did the floor, trunk divider, and roof. I have read that 2 gallons isn't enough if you want to do a whole car (doors, quarters, etc) but it was enough to cover the areas i did in two coats each.