Results 1 to 17 of 17
-
09-20-2022 #1
FS: Upgraded 1st gen subframe, RPM Transmissions, Hydroboost, Baer, C5 Acc. drive
ALL ITEMS HAVE BEEN SOLD
SubframeSOLD!!!
- Asking -
- Complete front subframe and suspension. Just add brakes of your choice, body mount bushings, wheels and bolt it to your ride.
- OEM subframe sandblasted and powder coated satin black
- ATS 670 steering box with rag joint coupler
- AFX Spindles
- GM Fast ratio steering arms
- SPC Stage II Upper and Lower Control arms
- Varishock double adjustable front shocks
- Helwig swaybar
- Hotchkis 2' drop coil springs
- S&P LS Swap brackets with engine mounts
- Stainless steel brake lines
- Replaced inner/outer tie rods (Moog)
- Hotchkis tie rod sleeves
Transmission - SOLD!!! - The transmission and converter have less than 5,000 miles on them.
- 4l70e out of 2008 TBSS
- Sent to RPM Transmissions for level VI rebuild https://rpmtransmissions.com/products/4l70e-level-vi/
- Precision Industries 3200 rpm stall torque converter
- SFI Flexplate
- Strange Engineering 27 spline billet yoke
- Transmission cooler with custom mounting brackets
- Transmission temp sending unit/sensor (I have a transmission temp gauge, but currently it will be sold with the DSE dash
- Includes custom black braided lines AN fittings to connect transmission to radiator, cooler and sending unit)
C5 Corvette accessory drive - SOLD!!!
- GM C5 Corvette accessory drive (p/n 19155167): Includes alternator bracket, alternator, power steering pump, tensioner, belt and mounting bolts
- GM water pump (can't find p/n)
- GM balancer (p/n 12635649 w\ AN adapters https://www.gmpartsgiant.com/parts/g...-12635649.html)
- Include new OEM balancer bolt
- SD7 A/C compressor, polished. Incudes billet adapter for A/C connecting lines
- Holley LS A/C bracket (high mount p/n 20-134 https://www.holley.com/products/engi...s/parts/20-134
- Holley LS A/C bracket/ spacer (p/n 21-1 https://www.holley.com/products/ls_p...nts/parts/21-1)
- Serpentine belt
- All aluminum brackets were sprayed with etching primer then top coated with a light silver 2K paint.
Hydroboost and Master cylinder - SOLD!!! - Willing to ship, but price does NOT include shipping and PayPal fees.
- Hydroboost base model purchased from Hydratech
- Hydroboost has stainless steel slip cover
- Baer Remaster, 1 1/8" bore, black (has about 1,000 miles on it)
- Baer proportioning valve, mounting bracket and lines
- I can include the stainless steel lines and fittings
-
09-20-2022 #2Registered User- Join Date
- Mar 2008
- Location
- Los Angeles
- Posts
- 43
ATS 670 steering box with rag joint coupler -
Any chance you would sell this separately?1987 El Camino SS
Displacement=357 CID 10-1
Intake=Lingenfelter SR w/30 lb 52mm TB
Heads=AFR 195 Street Eliminators
Cam=Lingenfelter 219/219 .560/.560 112 LC
Headers=Doug Thorley Tri-y 15/8", 2-1/2 exhaust
Computer=1227730 NVSRAM S_AUJP_V4 Bin
Trans=700-R4
Rear End=GN 8.5 Posi 342
Brakes= C-5
09-21-2022 #3
09-25-2022 #4Updated listing - Transmission, converter, flex plate, cooler and lines have been sold
09-26-2022 #5Registered User- Join Date
- May 2009
- Posts
- 96
Do you have any pictures of the hydro boost setup?
10-01-2022 #6Added pics...
10-08-2022 #7Registered User- Join Date
- Jul 2006
- Posts
- 103
Nice talking to you today rod, I’ll get payment out for the hydroboost next week. Thanks again!
10-08-2022 #8
10-13-2022 #9Registered User- Join Date
- Jun 2015
- Posts
- 48