Accufab throttle body linkage with shaker 77ta

[yellow1098Greg]

So I hope I can accurately describe this for you guys! I am running a MP Holley terminator setup with an accufab 4150 throttle body …..but am wondering what I can do to modify the linkage so I can use my throttle cable on my northwind intake. With the shaker and drop base it needs to be in a traditional position much lower than this high thing that comes with the accufab. Anyone have any ideas? Thank you!

[yellow1098Greg]

Bring back the answers to this forum!!!

[q67]

Cut the arm down , and build a dog house into the bottom of the air cleaner base

[yellow1098Greg]

Thank you! Looks great do you have anymore pics of the underside of cleaner base? And where did you get that cable and attachment?

[q67]

The linkage is not a cable it as a heim joint I found at an industrial supply store not an automotive store, it is threaded on to a 1/4 inch mild steel rod I custom bent and cut a thread with a die to screw the heim joint on, to make my throttle linkage, I will look for a pic of the mini heim.

[q67]

I had to drill and tape the throttle body arm to match the threads on the heim

[yellow1098Greg]

I had to drill and tape the throttle body arm to match the threads on the heim

thanks man! Ima give that a shot