Results 1 to 3 of 3
-
12-03-2021 #1Registered User
- Join Date
- Oct 2005
- Posts
- 2
2nd Gen Camaro +Factory AC + LSX - Fitment issues
I searched, but couldn't find any results even though I'm sure its been asked before. Looking at doing a 6.0 in a 1981 Z-28 with factory air. Since I'm in Florida, AC is a big deal. Will the factory AC box on the firewall clear the LS motor? If not are there any modded boxes out there that will work or do I have to go to Vintage Air? Will any headers work with this combo or do I need a block hugger type header?
-
12-07-2021 #2Registered User- Join Date
- Dec 2021
- Location
- Corpus Christi, TX
- Posts
- 8
While I haven't started my build yet, I did pick up a relocation bracket and accessories as from my understanding it won't fit in the stock location. For reference I have a 1981 Pontiac trans am.
http://www.brphotrods.com/mm5/mercha...gory_Code=CNV2
12-07-2021 #3Registered User- Join Date
- Oct 2005
- Posts
- 2
I was planning on using the Holley mid mount accessory drive for the compressor mount. I'm more worried about the clearance of the block/exhaust to the stop evaporator box on the firewall