Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register



    Results 1 to 3 of 3
    1. #1
      Join Date
      Oct 2005
      Posts
      2

      2nd Gen Camaro +Factory AC + LSX - Fitment issues

      I searched, but couldn't find any results even though I'm sure its been asked before. Looking at doing a 6.0 in a 1981 Z-28 with factory air. Since I'm in Florida, AC is a big deal. Will the factory AC box on the firewall clear the LS motor? If not are there any modded boxes out there that will work or do I have to go to Vintage Air? Will any headers work with this combo or do I need a block hugger type header?



    2. #2
      Join Date
      Dec 2021
      Posts
      5
      While I haven't started my build yet, I did pick up a relocation bracket and accessories as from my understanding it won't fit in the stock location. For reference I have a 1981 Pontiac trans am.

      http://www.brphotrods.com/mm5/mercha...gory_Code=CNV2

    3. #3
      Join Date
      Oct 2005
      Posts
      2
      I was planning on using the Holley mid mount accessory drive for the compressor mount. I'm more worried about the clearance of the block/exhaust to the stop evaporator box on the firewall