Results 1 to 5 of 5
-
10-05-2021 #1
Registered User
- Join Date
- Jan 2014
- Location
- Austin, TX
- Posts
- 637
How are you C10 guys mounting bucket seats?
My daily driver is an LS swapped '72 C20 Suburban. I just ordered a set of custom upholstered Cobra LeMans seats to replace the front bench. I'm curious how you guys with C10 race trucks are mounting buckets in the front. I know Corbeau and TMI both offer full width brackets that accept two buckets and sliders, but I'd prefer the space between the two seats to be open as I dont plan or running a center console.
Appreciate the input!
1972 C20 Suburban
1964 Corvette Coupe
-
10-06-2021 #2
Registered User
- Join Date
- Nov 2016
- Location
- Sulphur, La
- Posts
- 599
Mine (not done by me) are simply bolted through the floor. They are actually solid but not a great idea. I am just going to weld a plate under the floor to reinforce the areas where the mounts are.
10-06-2021 #3
Registered User
- Join Date
- Aug 2007
- Posts
- 645
On my C10 project before I finished the floor pan paint I placed the seats and drilled the holes. Then I took pieces of 1/8" sheet metal about 2" square and welded it to the bottom of the floorplan and drilled thru the 1/8".
10-11-2021 #4
Registered User
- Join Date
- Jun 2011
- Location
- Brooklyn, NY
- Posts
- 195
I drilled holes through the floor, and used these
https://www.tanksinc.com/index.cfm/p...rod/prd827.htm
10-11-2021 #5
Registered User
- Join Date
- Jan 2014
- Location
- Austin, TX
- Posts
- 637
perfect, thanks for the input!
1972 C20 Suburban
1964 Corvette Coupe
Reply With Quote
