Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register



    Results 1 to 5 of 5
    1. #1
      Join Date
      Feb 2018
      Location
      London, Ontario Canada
      Posts
      65
      Country Flag: Canada

      Lingenfelter Tool

      Does anyone have their cylinder head dowel pin locator tool? Going to install my LSA blower on my LS motor but the heads do not have the hole for the blower locator. Lingenfelter and their distributors are out of stock on this. I would rent this from anyone that has it.
      Thanks, Chuck



    2. #2
      Join Date
      Dec 2008
      Location
      Detroit
      Posts
      2,584
      Country Flag: United States
      Honestly most people just chisel the locator pin off of the blower and make sure is below the surface edge. That's what I did.
      Big dreams, small pockets....

      Chris--
      '72 Cutlass S LSA/T56 Magnum
      Bowler Performance, Rushforth Wheels, ATS, Holley EFI, KORE3, Ridetech

      Project Motor City Madness

    3. #3
      Join Date
      Feb 2018
      Location
      London, Ontario Canada
      Posts
      65
      Country Flag: Canada
      Fair enough, I may be overthinking this. Thanks for the reply

    4. #4
      Join Date
      Sep 2009
      Posts
      2,695
      Country Flag: United States
      I worked with a guy on FB who was supposed to be manufacturing one. We used my engine as a template and I successfully drilled my head out. Not sure why, but I wanted to have the slot drilled out.


      1955 Nomad project LC9, 4L80e, C5 brakes, Vision wheels
      1968 Camaro 6.2 w/ LSA, TR6060-Magnum hybrid and etc SOLD
      1976 T/A LS1 6 Speed, and etc. SOLD

    5. #5
      Join Date
      Feb 2018
      Location
      London, Ontario Canada
      Posts
      65
      Country Flag: Canada
      I know where you're coming from. My Holley sniper intake doesn't have the locator but because the blower does.......





    Advertise on Pro-Touring.com