Results 1 to 10 of 10
Thread: Finding stock 1998 s-10 spindles
-
08-24-2021 #1Registered User
- Join Date
- Aug 2021
- Posts
- 5
Finding stock 1998 s-10 spindles
Bought a 54 Chevy truck sitting on a 1998 QZ8 frame. It has new 2" drop spindles, rotors and disc brake assemblies. Sits to low for me. Want to replace with stock height spindles and stock height springs. Noticed the rotor hubs have a "gear" looking piece that goes around the OD rear shoulder of the hub. Never saw this before. If I can find the stock spindles, which seem to be very expensive, will this rotor hub fit the stock spindle? There is nothing on the new spindles that would indicate a necessity for this piece. May have to go with used spindles.
Any help would be appreciated.
Thanks
The frame is from an 1998 S-10.[ATTACH=CONFIG]191629Last edited by Red Green; 08-24-2021 at 10:40 AM. Reason: ADD Pictures
-
08-24-2021 #2