Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register



    Results 1 to 5 of 5
    1. #1
      Join Date
      Apr 2001
      Location
      Boston, MA
      Posts
      729

      Ultimate Headers, is this okay?

      Is this okay/will it close up when bolted on and having a gasket or is this an issue?



      ~Ryan

    2. #2
      Join Date
      Oct 2009
      Posts
      151
      If it was a one piece flange yes will be a problem but not on two pieces. You are good to go
      1969 frost green camaro
      LS3
      Speedtech pro touring front subframe
      ridetech rear 4-link
      moser 12 bolt eaton tru trac 3.73

    3. #3
      Join Date
      Apr 2001
      Location
      Boston, MA
      Posts
      729
      Thanks,

      Just got an email back from UH too, no worries on this. The SS has memory and it moves a bit. They will pull into place just fine.
      ~Ryan

    4. #4
      Join Date
      Sep 2006
      Location
      Southern Indiana
      Posts
      4,711
      Country Flag: United States
      If less than 1/8" your ok. If real excessive you may need to get a good tig welder to heat and "shrink" it carefully.
      Lee Abel
      AFTERMARKET PERFORMANCE

      1977 Chevy Monza 2+2:Project "Cheap Trick"
      1978 C10 Long bed , On air and trailer puller
      2006 Buell Blast ,Just a bike to ride and for mileage
      1966 Caprice 4dr Sports Roof fact.327/now 350/SOON 454???? Project "II Old,,,ZERO BUDGET OR LESS CAPRICE!"

    5. #5
      Join Date
      May 2010
      Location
      kitchener,Ontario,Canada
      Posts
      2,210
      Country Flag: Canada
      As someone who welds stainless all day .. id say they were pulled off the jig while still a touch hot

      Spinnin'my tires in life's fast lane

      Ryan Austin
      On twitter @raustinss
      On Instagram austinss70