Results 1 to 5 of 5
-
07-29-2021 #1
Registered User
- Join Date
- Jun 2014
- Location
- braintree essex england
- Posts
- 134
hydra boost braking would this fit
hello all . i have a 1982 c3 corvette and wanting to fit hydraboost . i have a hyratech kit which i bought for my 2nd gen trans am but never used . my question is can i fit this to my corvette am i right in thinking the only difference would be the fire wall fitting plate . cheers kev
-
07-29-2021 #2
Registered User
- Join Date
- Jul 2017
- Location
- Island Lake, IL
- Posts
- 131
There is no change on the firewall side. You would just be replacing the master cylinder.
07-29-2021 #3
Registered User
- Join Date
- Jun 2014
- Location
- braintree essex england
- Posts
- 134
thank you for the reply . mine is the hydratech kit and have the baer billet master cylinder is that ok . cheers kev
07-30-2021 #4
Registered User
- Join Date
- Jul 2017
- Location
- Island Lake, IL
- Posts
- 131
You should be fine in either case. The main thing will be using the proper bore size. Also, with those hydroboost units, I believe there is a long/short push rod version. The main thing will be making sure the booster push rod and master is right.
Some master cylinders have a little removable pin for using a long or short pushrod. Looks like a little bullet that slips in the back.
You’ll figure it out.
07-30-2021 #5
Registered User
- Join Date
- Jun 2014
- Location
- braintree essex england
- Posts
- 134
thanks for your help
Reply With Quote
