How To Wire DCC Controller with Trinary switch

[joeko23]

Hey guys I’m so horrible at wiring! Just got my DCC fan controller and I really don’t get the instructions.

1. Am I supposed to wire the fan controller directly to battery positive or negative? Or can I use starter solenoid or alternator as battery positive and core support as negative?

2. How do I wire the Restomod Air Trinary to the controller? A diagram would be super helpful!

3. According to Restomod Air diagram, white wire from compressor relay goes to Trinary switch. Do I have to run this white wire from interior to exterior via grommet? Or can I use one of the inputs of the AAW wire harness?

4. According to Restomod Air the red/white wire (08) and red wire (32) gets +20vdc. Is this correct? Or a misprint? Where will I get +20v from?

Here is a link to the DCC instructions:
http://www.dccontrol.com/FK95.pdf

Here is the Restomod Air diagram:




Here is the trinary diagram: