Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register



    Results 1 to 2 of 2
    1. #1
      Join Date
      Sep 2001
      Location
      Accord, NY
      Posts
      2,295
      Country Flag: United States

      plumbing oil return for an oil/air separator

      I'm going to install a Pro-Vent AOS on my LM7. What have folks done to allow drainback to the pan? I'd like to avoid welding a bung. I thought I read a while ago about using a banjo fitting at the drain plug location?

      Thanks
      69 Camaro convertible, 410, M22, 8-pt cage therapy program. SOLD.
      68 camaro - SOLD
      67 Bel Air - New street project with perfect floors, frame and trunk!

    2. #2
      Join Date
      Mar 2015
      Location
      Baton Rouge, LA
      Posts
      106
      Country Flag: United States
      Just some food for thought, if that AOS is serving as a PCV system catch can I'd avoid putting a drain on it that sends the contents back into the pan. The reason being that moisture will likely condense and accumulate there, and you definitely wouldn't want that being returned to the engine.





    Advertise on Pro-Touring.com