Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register



    Results 1 to 2 of 2
    1. #1
      Join Date
      Jul 2012
      Location
      eden ga
      Posts
      672
      Country Flag: United States

      Break in oil question

      I am building a nice little 406 small block flat tappet motor for my car. What break in oil are you guys using in your new motors to break it in? How long are you leaving it in? What oil are you using in your motor?



    2. #2
      Join Date
      Jan 2014
      Location
      Portsmouth NH
      Posts
      247
      Country Flag: United States
      I have used the Driven break in oil on three engines so far and it seemed to work well. https://drivenracingoil.com/c-138919...mbly-oils.html
      Choose the correct weight for you and change it out after about 500 miles. I would then replace it with a high zinc content oil of your preference. Too many oil choices out there, but do your research and make sure it has a high zinc content.
      1969 Camaro (Small Tyre Restomod/mild Protour) 245/40/18 F, 275/35/18 R, stock frame, full Ridetech suspension, LS engine, T56 Mag, Wilwood Brakes. A driver car.



    Advertise on Pro-Touring.com