Results 1 to 19 of 19
-
04-15-2021 #1Registered User
- Join Date
- Oct 2017
- Location
- Austin,TX
- Posts
- 33
1967 Camaro RS/SS Vert | RS Spec Chassis | Wegner LS7 | Pro Touring
Hi Guys,
Been meaning to get this up here for awhile, but here's my 1967 RS/SS Camaro Vert pro touring build. This has been a dream car of mine since I was a kid and have been spending way too much time watching the autocross/racing world from the sidelines so had to finally track down and build this car up. It was a perfectly good running car (Texas Car), which everything worked in besides the horn, and started to tear it down about 6 months ago to start the build. I've done all the breakdown and metal prep work in my 1 car garage here in Austin. Working with CHRA in Andice/Georgetown to help with the re-assembly. Michael Kaiser who runs the place has been great to work with. I'll outline the build below
Chassis
RS Spec Chassis with all goodies
Engine & Drivetrain
Fully Built LS7 for Wegner Motorsports (Casey is a solid dude)
Ultimate headers
Holley ECU
C&R Radiator
Bowler prepped T56 Magnum (Thanks Craig)
Tilton Hydraulic Clutch
Ricks custom tank with ZL1 Pump
Stainless works mufflers/custom building exhaust
Wheels & Brakes
Wilwood Superlite (6R F/ 4R R) in Competition Orange
Forgeline TBD
Electrical
Vintage Air
American Autowire Kit
Raingear Kit
Retro Electric Headlight Kit
Trucklights LEDs headlights
Interior
Holley Pro Dash 12.3
Wild Rides 4130 6pt cage
Recaro Pole Positions
Momo Wheel
Ididit race column/quick release
Tilton pedal assembly
C6 pedal dbw
Lokar handles
DSE battery Relo
Body
DSE Minitubs
DSE Fuel door
Bowler trans tunnel
Anvil Carbon Inner Fronts
Anvil Carbon rear bumper
Anvil Wicker Bill
Trackspec DropIn Vents for SS hood
Other bits
Totally Stainless/ARP hardware in most places
Ringbros hinges/mirrors/Hood bumps
DSE Fender Braces
Anvil door strikers
Hoping to have it back on the road in a couple weeks!
-
06-16-2021 #2Registered User
- Join Date
- Oct 2017
- Location
- Austin,TX
- Posts
- 33
Long overdue update here. Car is coming along nicely with the help of CHRA on some finish out fab work. Michael and the team there are A+ and awesome to work with. Going to add updates out of order but here is some of the buildout on putting a Holley 12.3 Digital dash in a 67. Haven't seen this done (Seen Franks badass ones for 69's) before but the current progress is looking awesome!
-
06-16-2021 #3Registered User
- Join Date
- Oct 2017
- Location
- Austin,TX
- Posts
- 33
Few more shots of some of the metalwork. I did the tunnel, firewall, wiper motor. CHRA did the tubs and fuel door.
-
06-16-2021 #4Registered User
- Join Date
- Oct 2017
- Location
- Austin,TX
- Posts
- 33
Some Shots of the Wegner LS7, Roadster Shop spec Chassis, Bowler T56 Magnum, Anvil Carbon Fendors, and C&R Rad
-
08-26-2021 #5Registered User- Join Date
- Oct 2017
- Location
- Austin,TX
- Posts
- 33
Few updates:
Getting bunges finished for cage
battery cutoff switch mounted
steering linkage
exhaust mock up
aluminum door interior skins
vents welded in for vintage air
shift mount finished
slight trimming to DSE fender braces to fit anvil closeout panel
Ordered forgeline wheels
Ordered Falken 615 tires
some new leds lighting from screaming chicken
Intake from Frank!
08-26-2021 #6