Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register



    Results 1 to 5 of 5
    1. #1
      Join Date
      Apr 2021
      Posts
      2

      LS3/TR6060 swap into a 68 Camaro

      Hi Guys,

      New poster here. I'm building a pro tour Camaro with an LS3/TR6060 swap going in. I picked up the whole setup with pedals and everything off a donor 2015 Camaro, whats the best way to setup the clutch for this type of swap. The donor clutch pedal doesn't seem like it would fit. Should be able to make the gas pedal work. Anyone make a conversion kit that makes this simple?

      Thanks!

    2. #2
      Join Date
      Oct 2011
      Posts
      696
      You need this kit from McLeod, come with everything including a new clutch pedal. You will use the slave cylinder that comes with the trans.

      https://www.summitracing.com/parts/mcl-1434002

      You will also need this fitting to connect the an line that comes in the kit to the clutch line at the trans.

      https://www.summitracing.com/parts/ear-652504erl

      You might as well pick up this bleeder as well. It will make bleeding the clutch much easier.

      https://www.summitracing.com/parts/hmi-tpsbl5g

    3. #3
      Join Date
      Apr 2021
      Posts
      2
      Quote Originally Posted by joeko23 View Post
      You need this kit from McLeod, come with everything including a new clutch pedal. You will use the slave cylinder that comes with the trans.

      https://www.summitracing.com/parts/mcl-1434002

      You will also need this fitting to connect the an line that comes in the kit to the clutch line at the trans.

      https://www.summitracing.com/parts/ear-652504erl



      You might as well pick up this bleeder as well. It will make bleeding the clutch much easier.

      https://www.summitracing.com/parts/hmi-tpsbl5g

      Thank you sir!


    4. #4
      Join Date
      Aug 2004
      Posts
      149
      Country Flag: United States
      I haven't watched the video series, but here is a video that may be helpful. It is part one of three about swapping in a TR6060 into a first gen.

      https://www.youtube.com/watch?v=d47sShq82XE

      Dave

    5. #5
      Join Date
      Oct 2011
      Posts
      696
      You’ll also need an adapter for the driveshaft, or just get a CV driveshaft from driveshaftshop.com

      https://www.sonnax.com/parts/3868-3-...er-flange-yoke





    Advertise on Pro-Touring.com