Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register



    Results 1 to 3 of 3

    Thread: Build list

    1. #1
      Join Date
      Jul 2018
      Posts
      433

      Build list

      I put together a list of the things I've done so far and what I started with, to help my daughter with info for when she ends up with my car:
      1968 Camaro
      454ci 460hp/515tq @ 5300rpm
      Block 361959 E11 78
      Heads 836781 E16 78
      Clay Smith Hyd Roller cam
      • Adv. 288/300 .050" 229/241
      • LIft 600/570 with 1.7 109 Lobe Sep
      Morel Hyd roller lifters # 4603
      Harland Sharp Roller rockers
      Merlin Hardcore 870cfm Holley carb
      Eldebrock RPM Air Gap Intake 7561
      Hooker Blackheart stainless headers # BH13181
      Flowmaster mufflers
      Autotrend EFI - Billet Plug Wire Looms
      Concept One Victory polished serpentine pulley system (reverse rotation waterpump)
      Cold Case big block radiator, 2 row 1.25” tubes
      Fessler radiator supports
      Muncie M20 4sp
      Ram Duel friction clutch
      Hurst Competition Plus shifter
      Hurst Billet Aluminum shifter arm
      Front suspension - Tubular upper and lower control arms
      Viking double adjustable coil over
      DSE 1.125 Swaybar
      ProForged tall upper ball joints, tie-rods, idler arm, pittman arm, centerlink, lower ball joints (1 million mile warranty)
      AGR Quick ratio 12:1 P/S gearbox # 492117
      PSC P/S pump # PFN-SP1200X
      Moroso remote P/S reservoir
      Rear suspension - ridetech Triangulated 4 link - double “R” joints
      ridetech Coilovers
      DSE HD Spring pockets DSR-040110
      DSE mini tubs
      Dakota DIGITAL VFD instrumentation w/integrated GPS speed sender
      Vintage Air A/C system w/intergrade climate control
      DSE Firewall delete panel
      Ididit tilt steering column
      MOMO leather steering wheel
      Sony 7” touch screen stereo
      Odyssey Trunk mounted Drycell AGM battery, remote solenoid and Master cutoff
      Retro-Electro electric headlight doors
      4” LED strip front turn signals
      BMR Solid body mounts
      BMR subframe connectors
      Billet Specialties Gas Pedal assy and brake/clutch pedal pads
      Lokar Throttle cable
      Ridetech Billet aluminum locking gas cap and filler neck
      Rear brakes 2015 Camaro V6 LT (bigbrakeupgrade.com)
      Front brake pads # D52
      Moser built 12 bolt, narrowed 6” 54.75” axle face to axle face
      3:55 gears, Ford Big bearing ends, Moser cover, Eaton posi unit, 1350 u joint
      Rims - Intro Design 5 spoke Endless - Front 18x8 4.5 backspace / Rear 19x12 5.75 backspace
      Michelin PILOT SPORT 4S - front 245/40-18 rear 325/30-19



    2. #2
      Join Date
      Nov 2018
      Posts
      642
      Country Flag: United States
      Something else that would help - buy a factory shop manual for your car, then alter it to match the changes. Don't remove anything, but in the appropriate section add in the new information. That's what I'm doing with my build. This site is where I usually find OEM repair manuals.

    3. #3
      Join Date
      Sep 2016
      Location
      Bakersfield, CA
      Posts
      603
      Country Flag: United States
      I keep the same sort of list, even more detailed actually with costs, P/Ns, links, etc. Mostly for insurance reasons but also for repair reference.
      http://www.TheFOAT.com/92GTA
      1969 Pontiac Firebird
      w/535ci IAII aluminum block, Dailey dry sump, Holley EFI (full road race build). Primer black w/black interior.
      1992 Pontiac Trans Am GTA w/SLP Performance Package. Dark Jade Grey Metallic, grey leather, T-Tops.



    Advertise on Pro-Touring.com