Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register



    Results 1 to 11 of 11
    1. #1
      Join Date
      May 2009
      Posts
      31

      Swapping an l86 Into a First Gen

      This forum doesn't seem to get a whole lot of activity so I figured I would post the build I've been working on.

      Its an L86 out of a 2020 Escalade and it's cleaning up well. Will be replacing the big block in my 68 camaro.

      Relatively mild setup.


      • GPI SS3 cam
      • BTR .660 springs
      • C8 intake
      • Stock heads
      • Trunnion upgrade on the rockers
      • Morel lifters
      • Holley LT oil pan
      • ICT Valley Cover


      I'm hoping to run a Holley Terminator ECU. They dont officially support larger fuel lobes so I need to look into that.



      Name:  20210228_135826.jpg
Views: 114
Size:  321.2 KBName:  20210228_134840.jpg
Views: 117
Size:  1.08 MB

      Anyone else working on a Gen V swap?

    2. #2
      Join Date
      Nov 2006
      Location
      Mountain Springs, Texas
      Posts
      3,708
      Country Flag: United States
      I’m planning to install an L86 and 8L90E in a 46 Chevy pickup in a couple of months. Going to leave it stock.

      Don
      1969 Camaro - LSA 6L90E AME sub/IRS
      1957 Buick Caballero - huge project
      1959 El Camino - Ironworks frame
      1946 Chevy pickup patina project
      1956 Cameo - full C5 suspension/drivetrain

    3. #3
      Join Date
      Apr 2001
      Location
      The City of Fountains
      Posts
      15,481
      Country Flag: United States
      The Terminator X Max V2 is an excellent option. For the power that you will be making, I don't see a need for larger fuel lobes. I don't know this for a fact, but I suspect Holley will have support for larger fuel lobes in a future firmware release.

      Andrew
      1970 GTO Version 2.0
      1967 Cougar build
      GM High-Tech Performance feature
      My YouTube Channel Please Subscribe!
      Instagram @projectgattago
      Dr. EFI
      I deliver what EFI promises.
      Remote Holley EFI tuning.
      Please get in touch if I can be of service.

      "You were the gun, your voice was the trigger, your bravery was the barrel, your eyes were the bullets." ~ Her

    4. #4
      Join Date
      May 2009
      Posts
      31
      Quote Originally Posted by andrewb70 View Post
      The Terminator X Max V2 is an excellent option. For the power that you will be making, I don't see a need for larger fuel lobes. I don't know this for a fact, but I suspect Holley will have support for larger fuel lobes in a future firmware release.

      Andrew

      Hey Andrew, thanks for the info. My hope is that Holley will have support for fuel lobes by the time I'm ready to make that purchase.

      I totally agree that the fuel lobe isn't really needed for my application but it seems like most Gen V cams are starting to come with a larger fuel lobe as a standard option. Not a lot of info on tuning DI setups with Holley but some of the HP tuner guys say they dont change anything for the larger fuel lobe. The fact that Holley has a disclaimer in the software about not supporting larger lobes makes me think that there may be more to the story. Just have to wait and see or worst case go with a different cam.

    5. #5
      Join Date
      Jul 2005
      Location
      Houston
      Posts
      90
      agree, not much traffic on this forum lately. LT swap info is sparse. In the old days, there would have been a couple of dozen guys building cars and doing swaps.

      I'm swapping an LT4 into a 69 camaro. Decent general info out there but not detail like you get when following a swap thread. LS swap threads were all over the place 10+ years ago.

      Is there another resource out there? FB and IG are such ridiculous mediums for following a swap. or maybe I'm not using them correctly.

      - - - Updated - - -

      Are there any detailed comparisons between the Holley/Wegner/drive junky front accessory drives?

    6. #6
      Join Date
      Apr 2001
      Location
      The City of Fountains
      Posts
      15,481
      Country Flag: United States
      Quote Originally Posted by glr0212 View Post
      agree, not much traffic on this forum lately. LT swap info is sparse. In the old days, there would have been a couple of dozen guys building cars and doing swaps.

      I'm swapping an LT4 into a 69 camaro. Decent general info out there but not detail like you get when following a swap thread. LS swap threads were all over the place 10+ years ago.

      Is there another resource out there? FB and IG are such ridiculous mediums for following a swap. or maybe I'm not using them correctly.

      - - - Updated - - -

      Are there any detailed comparisons between the Holley/Wegner/drive junky front accessory drives?
      I can tell you that the Holley midmount is very well engineered and is available for Gen 3/4/5 and LT4/5. I just got one for my GTO update.

      Andrew
      1970 GTO Version 2.0
      1967 Cougar build
      GM High-Tech Performance feature
      My YouTube Channel Please Subscribe!
      Instagram @projectgattago
      Dr. EFI
      I deliver what EFI promises.
      Remote Holley EFI tuning.
      Please get in touch if I can be of service.

      "You were the gun, your voice was the trigger, your bravery was the barrel, your eyes were the bullets." ~ Her

    7. #7
      Join Date
      May 2009
      Posts
      31
      Quote Originally Posted by glr0212 View Post
      agree, not much traffic on this forum lately. LT swap info is sparse. In the old days, there would have been a couple of dozen guys building cars and doing swaps.

      I'm swapping an LT4 into a 69 camaro. Decent general info out there but not detail like you get when following a swap thread. LS swap threads were all over the place 10+ years ago.

      Is there another resource out there? FB and IG are such ridiculous mediums for following a swap. or maybe I'm not using them correctly.

      - - - Updated - - -

      Are there any detailed comparisons between the Holley/Wegner/drive junky front accessory drives?

      Yeah you really have to sort through the junk on FB and IG. Youtube has some good info but it still takes some searching.

    8. #8
      Join Date
      Jul 2005
      Location
      Houston
      Posts
      90
      Quote Originally Posted by andrewb70 View Post
      I can tell you that the Holley midmount is very well engineered and is available for Gen 3/4/5 and LT4/5. I just got one for my GTO update.

      Andrew
      It looks nice. What are the advantages over wegner and Drive Junky? DJ touts being the only one to drive the supercharger directly. Holley's claim is keeping factory supercharger belt routing plus a strengthened PS bearing.

    9. #9
      Join Date
      Apr 2001
      Location
      The City of Fountains
      Posts
      15,481
      Country Flag: United States
      Quote Originally Posted by glr0212 View Post
      It looks nice. What are the advantages over wegner and Drive Junky? DJ touts being the only one to drive the supercharger directly. Holley's claim is keeping factory supercharger belt routing plus a strengthened PS bearing.
      I don't have direct experience with the Weaner or the DJ drives. However, just looking at the Weaner drive you can see that they mount the AC and the alternator up high on either side of the engine.

      The Holley LT4 drive mounts the alternator down low and tucks the AC compressor tighter to the block.

      The DJ is different still and has the alternator up high on the driver's side and the AC down low on the passenger side.

      All drives seem to have good belt wrap on the supercharger.

      Given the different configurations, I would think the best one is the one that fits best into your particular chassis.

      Andrew
      1970 GTO Version 2.0
      1967 Cougar build
      GM High-Tech Performance feature
      My YouTube Channel Please Subscribe!
      Instagram @projectgattago
      Dr. EFI
      I deliver what EFI promises.
      Remote Holley EFI tuning.
      Please get in touch if I can be of service.

      "You were the gun, your voice was the trigger, your bravery was the barrel, your eyes were the bullets." ~ Her

    10. #10
      Join Date
      Nov 2006
      Location
      Mountain Springs, Texas
      Posts
      3,708
      Country Flag: United States
      When evaluating drives I always compare power steering pulley belt wrap along with supercharger pulley wrap and number of belt ribs. Quite a few of them come up short and can lead to squealing/slipping belts under load, both supercharger and power steering imho.

      Don
      1969 Camaro - LSA 6L90E AME sub/IRS
      1957 Buick Caballero - huge project
      1959 El Camino - Ironworks frame
      1946 Chevy pickup patina project
      1956 Cameo - full C5 suspension/drivetrain

    11. #11
      Join Date
      Jul 2017
      Posts
      155
      Name:  6D2B094E-C84C-4D67-A812-2B66C4916921.jpg
Views: 38
Size:  324.5 KB

      Here’s mine with a 10 speed. Tuning is a fun challenge with the gen v.