Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register



    Results 1 to 6 of 6

    Thread: Broken tap

    1. #1
      Join Date
      Feb 2013
      Posts
      668
      Country Flag: United States

      Broken tap

      So here's where I am:

      Name:  stuck.jpg
Views: 122
Size:  415.7 KB

      1/4-20 tap snapped off about 1/2 deep. It will rotate about 1/4 turn. I tried a tap extractor and the pins sheared twice. Can't put enough load on it. This is on my trans crossmember, of course the very last thing I was doing. I haven't tried any other methods yet. Waiting for some sound advice before I go nuclear on it.
      I'd like to fix it now but realistically I can wait until the body is off in another month or so.

    2. #2
      Join Date
      Apr 2001
      Location
      The City of Fountains
      Posts
      15,481
      Country Flag: United States
      The only thing I can think of is welding a bolt to it.

      Andrew
      1970 GTO Version 2.0
      1967 Cougar build
      GM High-Tech Performance feature
      My YouTube Channel Please Subscribe!
      Instagram @projectgattago
      Dr. EFI
      I deliver what EFI promises.
      Remote Holley EFI tuning.
      Please get in touch if I can be of service.

      "You were the gun, your voice was the trigger, your bravery was the barrel, your eyes were the bullets." ~ Her

    3. #3
      Join Date
      May 2010
      Location
      kitchener,Ontario,Canada
      Posts
      2,141
      Country Flag: Canada
      compressed air while rotating it ???? ....also try using some heat to maybe free stuff up .
      Spinnin'my tires in life's fast lane

      Ryan Austin
      On twitter @raustinss
      On Instagram austinss70

    4. #4
      Join Date
      Feb 2013
      Posts
      668
      Country Flag: United States
      Since the crossmember is relatively easy to take off at this point, I'm going to try TIG welding to the end of it as the next, least destructive step. Should have the correct filler rod by tomorrow.

      (Part of me wants to just bash it with a punch and hope it shatters.)

    5. #5
      Join Date
      Feb 2013
      Posts
      668
      Country Flag: United States
      Spoke to one of our machinists at work and he gave me another non-destructive approach. Have to take the cross member off anyway so trying a drill press option.

      Name:  030C1FAE-22DE-4F83-B8DC-909989F91E7D.jpg
Views: 85
Size:  520.5 KB

    6. #6
      Join Date
      Feb 2013
      Posts
      668
      Country Flag: United States
      And this is done. Ted (machinist) gave me the Omega drill kit and a couple of old carbide end mills in the right size. It would have been even cleaner on a mill but the drill press got me where I needed to be. Started the hole with the carbide mill and blew through the rest of the tap with the Omega bit. Probably put a spot of weld on it, re-drill and tap to finish it out.

      Name:  xmember.jpg
Views: 74
Size:  213.7 KB