1970 Elcamino build!

[David Sloan]

Moving right along. Front suspension going back on the 69elcamino

[David Sloan]

Baby steps, Wilwood master cylinder and tick performance hyd. clutch installed.
Gas brake and clutch pedals installed.

[David Sloan]

9” Moser Rear end installed new brake lines started.
4th gen Camaro wiper motor and linkage installed.

[David Sloan]

Wiper motor installed

[thumper877]

Making some good progress. Looking nice

[David Sloan]

Making some good progress. Looking nice

Thank you sir!
Im trying😊

[David Sloan]

Today’s work fuel tank and fuel lines installed.
Want be much longer before this things on the ground.

[David Sloan]

Got the Rearend buttoned up today.
Center installed,axels installed, rotors installed.
Waiting on brake and fuel line parts to come in so I can get this think on the ground.

[David Sloan]

Not a lot going on, waiting on parts sucks.��
Trying to keep moving forward without installing things that will be in the way of other work to be done.
Turbo mounted and some of the tubing. Cold side and hot side tubing.

[Steve68]

fastest build ever! condense it later probably to 3 pages, lol

I'm amazed what you do!

I wish I was amazed at what I do! which is not much!

[David Sloan]

fastest build ever! condense it later probably to 3 pages, lol

I'm amazed what you do!

I wish I was amazed at what I do! which is not much!

Thank you sir!

[David Sloan]

Since I’m waiting on parts and wanting to keep moving forward.
I’m going to start getting the motor ready to slid in as soon as the car is on the ground.

[thumper877]

Cars coming along great and looks good. I gotta say I'm a little jealous of that garage. Wish I had that much room

[David Sloan]

Cars coming along great and looks good. I gotta say I'm a little jealous of that garage. Wish I had that much room

thank you sir!
I think the picture makes it look bigger than it is. 26’x36’x9’

[andrewb70]

Great progress David. Now would be the time to update to the Bosch iBooster and also install a DBW pedal. I highly recommend the DBW for all Holley EFI customers.

Andrew

[wfo guy]

What is the horsepower goal?

[David Sloan]

Great progress David. Now would be the time to update to the Bosch iBooster and also install a DBW pedal. I highly recommend the DBW for all Holley EFI customers.

Andrew

Thank you sir
I already have the stock truck intake and throttle body, it’s drive by cable . I also have some clean and flow match LSA injectors.
im waiting on the fuel lines and fitting to come in now. I was hoping to have it off the rotisserie by now but looks like next week.
my plan is to get it running see how well the system that I have Frankenstein together works then try to make it better.

- - - Updated - - -

1388576[/URL]]What is the horsepower goal?

500 to the tire would be great to start off with.��

[raustinss]

maybe i missed it ,trying to catch up lol . what wiper motor did you use and besides the linkage mods what was needed to make it all work ?

[David Sloan]

1388599[/URL]]maybe i missed it ,trying to catch up lol . what wiper motor did you use and besides the linkage mods what was needed to make it all work ?

2000 Camaro for the steering column and the wiper motor. The 4th gen Camaro has a park mechanism on it and a mounting plate, make sure and get it all. Hope that helps.

[David Sloan]

Not much to report on the Elcamino.
Finally got the steering put together as the tie rods an the steering arms came in.
One more piece of the brake line came in and got it installed.
Some more of the fuel system came in, the fuel pressure regulator and a couple fittings.
I was going to run the rubber fuel lines that I had but change my mind just didn’t like the looks of it especially since I needed to run another one for a return line.
Still waiting on the aluminum fuel line to come in.