Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 1 of 1
    1. #1
      Join Date
      Oct 2011
      Posts
      696

      Camaro Sound And Heat Deadening Instructions

      Many of us referred to sounddeadenershowdown.com as a guide to properly deaden and insulate our cars. Unfortunately, the site is now down, but I have copied all the instructions for a first gen Camaro. These instructions can be applied to any vehicle and are rough estimates anyway.



      Moderators, maybe this info should be stickied?


      Size 6" X 10" (152mm X 254mm)
      Adhesive Butyl
      Gross Thickness 2 mm (80 mils +- a few)
      Foil Thickness 8 mils








      CLD Tiles™ 97
      Plain MLV 1/8" 1 lb/ft² 54" - Linear Feet 28
      Sheets 1/8"x36"x54" Neoprene/EPDM Closed Cell Foam 10
      Velcro® Strips, Adhesive both sides - 2"x4" 36
      HH-66 Vinyl Contact Cement - 32 oz can 1
      This materials list is an estimate based on measurements provided by a customer or customers. Quantities should be considered what I expect to need for the project instead of what I know will be needed. This turns out to be very close in almost every case but is absolutely not guaranteed! "Add to Cart" for total, shipping and purchase.
      Product Distribution by Area:
      Doors (each):
      6 CLD Tiles, outer skin
      2 CLD Tiles, inner skin
      1 CLD Tile, cut into smaller pieces, trim panel
      8.7 ft² MLV
      8.7 ft² 1/8" CCF
      4 Velcro Strips, adhesive 2 sides
      The CCF and MLV will need to go on the outer door skin.
      Passenger Compartment Quarter Panels (each):
      3 CLD Tiles, outer skin
      5 ft² MLV
      5 ft² 1/8" CCF
      2.5 Velcro Strips, adhesive 2 sides
      Kick Panels (each):
      .5 CLD Tile
      1.2 ft² MLV
      1.2 ft² 1/8" CCF
      1 Velcro Strip, adhesive 2 sides (cut into thirds)
      Floor:
      18 CLD Tiles
      30.2 ft² MLV
      45 ft² 1/8" CCF (extra is to double up in the bottoms of the foot wells)
      2 Velcro Strips, adhesive 2 sides
      Back Seat Platform / Riser / Partition Behind Back Seat:
      9 CLD Tiles
      14.6 ft² MLV
      14.6 ft² 1/8" CCF
      5 Velcro Strips, adhesive 2 sides
      Roof:
      12 CLD Tiles (assumes space between roof and headliner)
      C-Pillars (each):
      1 CLD Tile
      Rear Deck:
      2 CLD Tiles
      3.7 ft² 1/8" CCF
      Trunk Floor:
      14 CLD Tiles
      22.4 ft² MLV
      22.4 ft² 1/8" CCF
      6 Velcro Strips, adhesive 2 sides
      Trunk Lid:
      5 CLD Tiles
      Quarter Panels (each):
      4 CLD Tiles
      6.6 ft² MLV
      6.6 ft² 1/8" CCF
      3 Velcro Strips, adhesive 2 sides
      Trunk Back Wall:
      2 CLD Tiles
      4.5 ft² MLV
      4.5 ft² 1/8" CCF
      2 Velcro Strips, adhesive 2 sides
      Totals:
      97 CLD Tiles
      114.7 ft² MLV
      133.2 ft² 1/8" CCF
      36 Velcro Strips, adhesive 2 sides
      1 32 oz can HH-66 Vinyl Contact Cement




    Advertise on Pro-Touring.com