Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register



    Results 1 to 1 of 1
    1. #1
      Join Date
      Dec 2020
      Posts
      2

      Newbie introduction LSX61

      Hello and glad to be here! My name is Chuck and im in the process of building my 61 Bubbletop Impala. Thought id join the forum for ideas and info. Im getting to the end of the build and at this point the car has a stock frame modified for a 1 piece 3in aluminum driveshaft. Rear differential is a narrowed ford 9in 35 spline Eaton tru trac. Gear ratio is 3.50 and trans is a Tremec tr6060 with a magnum tail housing for the 1350 slip yoke. Engine is a GMPP LSX block 410 stroker. The rotating assembly is 2013 COPO 396 with Gibtec pistons. Lots of high end cars on here that I plan to draw inspiration from!





    Advertise on Pro-Touring.com