Results 1 to 3 of 3
Thread: C1 Corvette LSA swap
-
12-02-2020 #1
Registered User
- Join Date
- Nov 2020
- Location
- The Netherlands
- Posts
- 9
C1 Corvette LSA swap
Hi all
Taking a 2014 Camaro ZL1 apart to swap the engine and automatic trans. in a 62 C1 Corvette.
Wich electrical parts not to forget to take out of the car at the wrecking yard ?
We are going with a stand alone wiring later on, but i am afraid i forget something to take out what is needed later in the building process
Wander
-
12-06-2020 #2
Registered User
- Join Date
- Sep 2020
- Posts
- 8
Just the ecu for the transmission and engine controller and wiring harness. You will need aftermarket parts to get ac , power steering etc.
-
12-08-2020 #3
-Moderator/Sponsor-
- Join Date
- Jun 2001
- Location
- Newbury Park, CA
- Posts
- 5,822
If you can grab the fuel pump, get it. Rock Valley makes a very nice C1 tank that will accept the fuel pump. It can then be driven similar to the OE setup using one of these: https://www.vaporworx.com/shop/product/pwzl13b-tm/
VaporWorx. We Give You Gas http://www.vaporworx.com
-
Reply With Quote
