Custom HolleyEfi 12.3 on 1969 camaro with 69 nova dash pad

[kasprzykdc06]

Will need to extend steering column 3/8 threaded hangers and drill a hole that will be hidden to attach panel

So does the steering wheel sit much lower then? I assume i'll need a tilt column.

[frankv11]

It’s not very much needed and you’ll probably wouldn’t notice it but tilt would be good

[jamminj007]

When can I order one?

[hp junkie]

I just joined this site. This dash was what I was looking for. Can I get a # for the builder of this awesome piece Thanks Kevin

[frankv11]

The all new 1969 camaro custom Motec mc1212 gauge bezel Description below applies to both Holley efi 12.3 and Motec mc1212

https://youtu.be/YRzLIE2R5Fg

Holley efi 12.3 / Motec MC1212

Pricing is $3k by order only $300 deposit remainder when ready to ship . Running about 5 weeks out at the moment . —————————————————-1969 camaro Holley Efi 12.3 gauge bezel to be used with 69 nova dash pad. These also fit 69-76 novas with minor mods to car.
These are custom made pieces using .063 3003 AL . Composed of about 30 separate pieces that need to be precisely bent / shaped and Tig welded together without bleeding to inside corners for ultimate clean look . Will mount to 69 camaro stock locations and made for stock 3.5” steering column only . Very tight clearances . Shipped 90% plus ready for paint. Unit has overall curvature just like OEM , overall just very ergonomic in looks and function .———————————- #grayareasteelco #rawsteelcamaro #zerowoodinterior #1969camaross #1969camaro #1967camaro #1968camaro #firstgen #jlaudio #camarohoodlouvers #musclecar #customintake #handmadeintheUSA
#Americanmuscle #protouring
#coldairintake #lscoldairintake #customholleyefi #customkickpanels #customhoodlouvers #customColdairintake #jlmicrosub #firstgencamaros #kickpanelspeakers #kickpanels #holleyefi #holleyperformance #1969camaroholleyefigaugepanel #holleydash #GAS_co

[Build-It-Break-It]

Did the price jump from $1500 to $3000 on the bezel? I was waiting a few more months until my car is painted but was considering one.

[frankv11]

Did the price jump from $1500 to $3000 on the bezel? I was waiting a few more months until my car is painted but was considering one.

Hi, yes price increased a while back post #134 I think
Way too much labor goes into this things

[Build-It-Break-It]

Ah OK no problem, I missed that post. I understand, time is money. Thank you for the fast reply.

[frankv11]

Ah OK no problem, I missed that post. I understand, time is money. Thank you for the fast reply.

No problem at all 🤝

[P dog]

Upon a lot of trying to get this huge 12.3 Holley Efi Performace screen into a 69 camaro . I am finally done . It’s made entirely of .063 aluminum fits stock steering column , it faces driver eye sight perfectly , bolts on to stock location and made to use 1969 nova dash pad which in my opinion is best looking by far.
Making a few of these $3k, $300 deposit gets you on the list. running about 6 weeks out.

Check out YouTube link https://youtu.be/Rz0Q6LVP13E
Attachment 191219Attachment 191220Attachment 191221Attachment 191218Attachment 191222

I would like to order one what do I do [email protected]

- - - Updated - - -

How you doing what’s the process to get one going for my 69 Camaro
[email protected] or call 916-798-1419

[frankv11]

Hi
Feel free to call me anytime to discuss your set up
323-974-5357 Frank.v

[frankv11]

These is what the 1969 camaro custom gauge bezel Motec c1212 looks like. Made two of these thus far .

https://youtu.be/kOaTSDoHfUs
https://youtu.be/YRzLIE2R5Fg

[John McIntire]

Sick work Frank!

[frankv11]

Sick work Frank!

Thank you john

[jamminj007]

Love mine

[frankv11]

Love mine

Love it

[frankv11]

Just a few shots of the Holley efi 12.3 for 1969 Camaros this one here is for Ty Montoya’s 69 camaro built by lakeside Speed and Shine in AZ . Debuting on the next Goodguys I believe

[frankv11]

Small clip of his car https://youtu.be/0l2F62hXjaQ

[frankv11]

This is what you should expect when you order the Holley efi 12.3 or the Motec C1212 . @emorris69 is joining a very exclusive club with Motec gauge cluster bezel for another of his 69 Camaros , also running the Holleyefi 12.3 on another 69. The man has got it going on . ______________Holley efi 12.3 or Motec C1212
Pricing is $3k by order only $300 deposit remainder when ready to ship . Add $300 for the Motec version. Running about 5 weeks out at the moment . —————————————————-1969 camaro Holley Efi 12.3 gauge bezel to be used with 69 nova dash pad These also fit 69-76 novas with minor mods to car.
These are custom made pieces using .063 3003 AL . Composed of about 30 separate pieces that need to be precisely bent / shaped and Tig welded together without bleeding to inside corners for ultimate clean look . Will mount to 69 camaro stock locations and made for stock 3.5” steering column only . Very tight clearances . Shipped 90% plus ready for paint. Unit has overall curvature just like OEM , overall just very ergonomic in looks and function .———————————- #grayaresteelcompany #rawsteelcamaro #zerowoodinterior #1969camaross #1969camaro #1967camaro #1968camaro #camarohoodlouvers #customintake #handmadeintheUSA
#Americanmuscle
#coldairintake #lscoldairintake #customholleyefibezel #customsailpanels #custommotecgaugebezel #motecc1212#customholleyefigaugebezel #1969camaroholleyefigaugepanel #custommotec #jlmicrosub #motecgaugebezel #1969camaromotec #firstgencamaros #customlt5coldairintake #customlt4coldairintake #holleyperformance #holleyefi123 #holleydash .

https://youtube.com/shorts/jQ4loJaP_N4?feature=share

[Nativefx]

Quality work Frank! The cold air intake setup I got from you was just as impressive. I've been looking at trying to figure out how to us the Holley setup for my 68 charger and how it might look. Again, great job!