Results 1 to 4 of 4
Thread: Big Block in Falcon
-
09-21-2020 #1Registered User
- Join Date
- Aug 2020
- Posts
- 6
Big Block in Falcon
Hey guys,
Can not find any treads about a big block fitting in a 1960 Falcon while still keeping the stock flat hood.
I believe, mistakenly, that a dry sump can lower the engine. That is apparently not the case after some reading.
Leaning toward a BBC..
Any suggestions?
thanks
-
11-07-2020 #2
Not trying to be a smart @$$, but why not get something like this and swap components? Or are you building a full frame conversion where the only internal limitations are the outer sheet metal?
https://portland.craigslist.org/clk/...218671711.htmlIf it breaks I didn't want it in the first place.
69 GTO
72 FIREBIRD
64 BONNEVILLE FUNERAL COACH
70 JAVELIN
52 F1 FORD PU
29 FORD PU
85 ALFA ROMEO
ASSORTED DUCATI'S
91 BLAZER LOWRIDER
-
11-07-2020 #3
Um..............maybe go a small block with big block inches?
Tracey
-
11-07-2020 #4Registered User
- Join Date
- Aug 2010
- Location
- Seattle area
- Posts
- 360
If I remember correctly they had a 427 Medium Riser in them with a "Bubble "hood.
-