Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register



    Results 1 to 5 of 5
    1. #1
      Join Date
      Feb 2014
      Location
      SoCal
      Posts
      308
      Country Flag: United States

      Ridetech Front alignment spec

      Have the front upper and lower ridetech control arms with coilovers. What alignment specs for a street driven car? Thx
      1967 GTO.



    2. #2
      Join Date
      Oct 2004
      Location
      IL/TN
      Posts
      909
      Country Flag: United States
      there is no given set up, it depends on what you want to do or expect but since you are on this forum I would start with 3/4-1* negative camber, 4-6 * positive caster and 1/16 total toe in, but you need to adjust to fit your application.
      https://www.protouringf-body.com "doing what they say can't be done"

    3. #3
      Join Date
      Feb 2013
      Posts
      1,414
      Country Flag: United States
      The specs he listed above are right at what we recommend. From those base dimensions, it's really preference from that point.


      Ridetech Suspsension
      Tech Specialist
      Phone: 812.481.4734

      Project Fox
      1979 Trans Am

    4. #4
      Join Date
      Nov 2008
      Location
      Lawrenceburg, TN
      Posts
      4,083
      Country Flag: United States
      street... ¼ to ½ neg. camber, 3 to 4 pos. caster, 0" to 1/8" Toe In

    5. #5
      Join Date
      Nov 2008
      Location
      Lawrenceburg, TN
      Posts
      4,083
      Country Flag: United States
      RACING 1 ½ to 2 neg. camber, 5 to 8 pos.caster, 1/8" out to 1/8" IN......toe out on a short autocross track with tight turns, toe in on road course





    Advertise on Pro-Touring.com