Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register



    Page 1 of 2 1 2 LastLast
    Results 1 to 20 of 23
    1. #1
      Join Date
      Mar 2018
      Posts
      68

      Stronger wheel studs needed?

      Just finished the Nova project and finally got around to putting on some decent tires (nitto 555Rs). Might be over thinking this but wondering What are the limits of the stock (7/16-20 dorman) wheel studs? Do I need stronger ones?


      Car has an LS3 (440 whp/400 wtq) TKO 600, 8.5 10 bolt 3.91s and 1/4 wheel spacers. The current studs are plenty long.


      Thanks!



    2. #2
      Join Date
      Oct 2014
      Location
      DFW, Texas
      Posts
      422
      Country Flag: United States
      Studs will be the least of your worries. I suspect the 10bolt will come apart before the studs do!
      1972 Plymouth 'Cuda - Not LS-swapped, 5.7L Hemi [MS3 Gold Box], T56 Magnum 6-speed - 'Cuda Build Page
      1976 Dodge D100 - Warlock
      2016 Subaru WRX - E30 Tune

    3. #3
      Join Date
      Mar 2018
      Posts
      68
      Noooooooo (I hope not). The 8.5 inch 10 bolt gets a bad rap and is stronger than most think. Had the Eaton posi rebuilt and stronger axles put in. Car is a street car, will probably only see a prepped drag strip once or twice in its life.

    4. #4
      Join Date
      May 2020
      Posts
      19
      It’s pretty easy to drill or have someone drill them for bigger studs for peace of mind. Though you’d find they are engineered to match the size of the axles, bearing etc.

    5. #5
      Join Date
      May 2010
      Location
      kitchener,Ontario,Canada
      Posts
      2,336
      Country Flag: Canada
      It's not the 10 bolt the messes the bed ... it's the small c clip axles
      Spinnin'my tires in life's fast lane

      Ryan Austin
      On twitter @raustinss
      On Instagram austinss70

    6. #6
      Join Date
      Feb 2013
      Posts
      799
      Country Flag: United States
      Having lost a wheel...1/2" studs all around.

    7. #7
      Join Date
      Aug 2010
      Location
      Seattle area
      Posts
      360
      I have a 1979 Z-28 Pro Touring carwith a 500 Hp 377 small block chevy .It has an Super T-10 4 speed and an 8.5 10 bolt with a Moroso "brute strength" posi .30 spline Mosier axles .ARP 7/16 x 20 studs . with no issues .And if you are really worried .You can always go with 1/2" studs.
      Attached Images Attached Images  

    8. #8
      Join Date
      May 2020
      Posts
      19
      Maybe give Mosser a call. They will be the best to advise.
      Firstly make sure the rim is secure on the axle boss. It takes the bulk of the load. The studs only hold the rim to the flange in sum degree.

    9. #9
      Join Date
      Jun 2010
      Location
      Deployed
      Posts
      3,280
      Country Flag: United States
      Quote Originally Posted by NovaSF View Post
      Just finished the Nova project and finally got around to putting on some decent tires (nitto 555Rs). Might be over thinking this but wondering What are the limits of the stock (7/16-20 dorman) wheel studs? Do I need stronger ones?


      Car has an LS3 (440 whp/400 wtq) TKO 600, 8.5 10 bolt 3.91s and 1/4 wheel spacers. The current studs are plenty long.


      Thanks!

      I would upgrade...with that power level I would at a minimum use ARP studs. I have seen 12mm OEM studs break, upgrading them is cheap insurance.
      1970 Camaro/DSE build


      Are you driver enough? Maybe....come on blue!
      https://www.pro-touring.com/threads/...71#post1147371

    10. #10
      Join Date
      Feb 2013
      Posts
      799
      Country Flag: United States
      One observation about Dorman (since I work in the industry), they have no production facility. They are basically a resale company and their parts receive very minimal scrutiny or validation.

      I certainly wouldn't put their stuff in a racing application.

    11. #11
      Join Date
      Nov 2008
      Location
      Lawrenceburg, TN
      Posts
      4,083
      Country Flag: United States
      your 8.5 10 bolt will be fine use good axles and a good posi... I have had no issues for 10 years of hard racing


      Name:  11357104_419323384920956_7444752765335660020_o.jpg
Views: 266
Size:  192.3 KB


      Name:  21994167_10155675132316192_8187904876353075594_o.jpg
Views: 281
Size:  153.7 KB

    12. #12
      Join Date
      May 2020
      Posts
      19
      Quote Originally Posted by Rod View Post
      your 8.5 10 bolt will be fine use good axles and a good posi... I have had no issues for 10 years of hard racing


      Name:  11357104_419323384920956_7444752765335660020_o.jpg
Views: 266
Size:  192.3 KB


      Name:  21994167_10155675132316192_8187904876353075594_o.jpg
Views: 281
Size:  153.7 KB

    13. #13
      Join Date
      Mar 2018
      Posts
      68
      Hell yeah nice Camaro!

      - - - Updated - - -

      Thanks everyone for the advice.. After some research I think the best option for me is upgrading to 7/16 ARP studs. Drilling out the axles to accommodate 1/2 is not in the cards right now. The ARP ones are a bit longer but would rather be safe than sorry.

      Only thing I’m worried about is the Knurl Diameter ..... 0.486 on the ARPs and 0.472 on the stock Dorman ones. Hoping they’ll go on without any machining of the hub needed but we’ll see.

      Some interesting notes... the stock Dorman studs are grade 8.

    14. #14
      Join Date
      Dec 2005
      Location
      TuoCo, CA
      Posts
      992
      Country Flag: United States
      That's a big difference in knurl diameter to just pull through.
      I'd take the studs and axles to a machine shop and have them installed. While you're at it just to thread in 1/2" studs. The cost wouldn't be that much.
      Steve
      '68 Camaro - SBC, TKO600, 3.73 Moser 12-bolt, Speedtech, ATS-AFX, Hotchkis, Forgeline, Ron Davis and C5 brakes (Kore3), Holley Terminator TBI.
      Check it Out Here

    15. #15
      Join Date
      Feb 2019
      Location
      Kankakee IL
      Posts
      362
      I was just going to say the cost of better studs is far cheaper than the results from broken cheaper ones.
      Tracey

    16. #16
      Join Date
      Dec 2010
      Location
      Fredericksburg, VA.
      Posts
      3,155
      Country Flag: United States
      If you have to enlarge the flange holes anyway for your new ARP studs you might as well upgrade to 1/2". It would be a waste of time and money to retain the 7/16 studs.
      Steve Hayes
      "Dust Off"
      68 Camaro

      Given sufficient initial acceleration, even pigs can fly!

    17. #17
      Join Date
      May 2020
      Posts
      19
      They should go in fine. Are you bashing them in or pressing?
      Make sure you use the tension ARP state when torquing the wheels.

    18. #18
      Join Date
      Mar 2018
      Posts
      68
      I was gonna try and pull them through with a nut, after talking to a few knowledgeable sources (Sierra Axle, Moser) I don’t think that’ll work without enlarging the holes a bit.

      I can try to grind down the wheel stud holes a little and pull through some ARP studs but that seems a little hokey (or not)

      How difficult is it to remove/re-install the axles? I’m somewhat mechanically capable (probably a 5 out of 10) but a little hesitant on getting in there. Just don’t want to mess anything up (just had the posi rebuilt and new bearings installed).

      It would be cheaper for me to take out the axles and get them machined and then reinstall vs $400-$500 from the rear ended shop remove/machine/re-install.

      Thoughts...?

    19. #19
      Join Date
      Feb 2013
      Posts
      799
      Country Flag: United States
      It's not that hard. Messy, but not hard. Shouldn't take more than an hour including lifting the car.

    20. #20
      Join Date
      Mar 2018
      Posts
      68
      Good news (light bulb moment)... started researching how to get the axles out and was set on pulling them. Started thinking a little more And walking through the process .... (lightbulb)... the axles are new, are there any other provisIons on em for different studs...? Duhhhhhh. Went downstairs and pulled off the drums and viola.. after laughing out loud to shake off the embarrassment, called Sierra axle to confirm... yep, the axles are also provisioned to accept 1/2 - 20 screw in studs. YESSSSSS!
      Looks like I’ll just need to enlarge the stud holes on The drums.

      Thanks everyone!

    Page 1 of 2 1 2 LastLast




    Advertise on Pro-Touring.com