Results 1 to 13 of 13
Thread: LS1 rear disc swap spacer
-
05-03-2020 #1
Registered User
- Join Date
- Mar 2013
- Location
- Sunny Calif
- Posts
- 307
LS1 rear disc swap spacer
Where can I find LS1 rear disc backing plate to axle flange spacer. Swapping onto 10 bolt 68 Camaro. Thanks
-
05-03-2020 #2
Registered User
- Join Date
- Aug 2005
- Location
- Hamilton, NJ
- Posts
- 4,295
kore3?
Scott from NJ.
Vent Windows Forever! ...
Feather-light suspension, Konis just couldn't hold
I'm so glad I took a look inside your showroom doors
05-03-2020 #3
Registered User
- Join Date
- May 2015
- Location
- Island Lake, IL
- Posts
- 815
05-08-2020 #4
Registered User
- Join Date
- Mar 2013
- Location
- Sunny Calif
- Posts
- 307
Originally Posted by F-Body International
sweet! thx
05-08-2020 #5
Registered User
- Join Date
- Jul 2006
- Location
- El Paso, Texas
- Posts
- 404
Even cheaper. I just used it on an LS1 brake rear swap on a 68 Camaro. Worked like a champ.
Alex
https://www.ebay.com/itm/Gm-10-12-bo...ss!79925!US!-1
https://www.ebay.com/itm/Gm-10-12-bo...ox!79925!US!-1
05-09-2020 #6
Registered User
- Join Date
- Mar 2013
- Location
- Sunny Calif
- Posts
- 307
Originally Posted by CapSS92
is one for a single item purchase and the other for a pair thanks
05-09-2020 #7
Registered User
- Join Date
- Jul 2006
- Location
- El Paso, Texas
- Posts
- 404
Both are for pairs.
Alex
05-10-2020 #8
Registered User
- Join Date
- Mar 2013
- Location
- Sunny Calif
- Posts
- 307
Gottem on order much appreciate the 411. Originally Posted by CapSS92
05-10-2020 #9
Registered User
- Join Date
- Jul 2006
- Location
- El Paso, Texas
- Posts
- 404
No prob. Post pics when you're done.
05-11-2020 #10
Registered User
- Join Date
- Mar 2013
- Location
- Sunny Calif
- Posts
- 307
Originally Posted by CapSS92
No prob. Post pics when you're done.
Well im half way there, waiting on parts for now.....
05-11-2020 #11
Registered User
- Join Date
- May 2015
- Location
- Island Lake, IL
- Posts
- 815
Which thickness did you go with?
I have not verified but make sure you have it shimmed to the correct spacing.
05-12-2020 #12
Registered User
- Join Date
- Mar 2013
- Location
- Sunny Calif
- Posts
- 307
Always my friend, if i am anything its meticulous...... Originally Posted by F-Body International
i believe the spacers are .250" in thickness. Have heard of some cutting out Drum brake backing plate for spacer material as well.
05-22-2020 #13
Registered User
- Join Date
- Mar 2013
- Location
- Sunny Calif
- Posts
- 307
Originally Posted by MAGONSTERZ68
update, shims showed up they are .130 thick waiting on pads and rotors before I drop axle and get to measuring up.
Reply With Quote
