1st Gen Camaro Art Morrison GT Front Clip with C6/C7 Control Arms

[C Presley]

I'm ready for my Gen2 Subframe. When do you want the deposit?

[Cdog]

For those of you looking at this thread like a creeper, on the fence salivating I do suggest you make your move. I have negotiated a way better than msrp on both the AME frame and Lateral Dynamics uprights for those going in on this package. These are 1 inch drop uprights. Modular. Correct bumpsteer, roll center and steering geometry. Engineered in a way that allows customization and improvements if need be. Here's a couple of pics to wet your appetite.

https://www.lateral-dynamics.com/pro...front-and-rear

[Mark@lateral-dynamics]

Just to reiterate what Corey stated, this is a rare opportunity that will probably never happen again. Corey and I have been communicating literally since the beginning of the year and I see first hand how much effort he put into making this happen. Yes, our side stands to benefit from this as well so we also have a vested interest, but this currently the very best option for a full front system on the market - performance, value, ease of maintenance, strength, darned attractive - it is a winning combination that will literally transform your project. The quality of the AME stuff is, and always has been world class.

Time to jump in folks.

[Snowcatter]

Really wish this had happened last year...I would much rather have had the Corvette control arms on my build. Bummer :(

[Cdog]

3 of the 5 needed are spoken for. Step on up for the group buy fellas!

[cwylie]

How much for a bare sf?

[Cdog]

How much for a bare sf?

PM inbound.

[WFO]

please add me to this list i want one asap for a 1970 camaro project

[ErikLS2]

I sent you contact info for pricing

[Cdog]

Hey fellas 2020 has been no picnic or short of heartaches and surprises. Some of the interested parties went quiet on me around and post election time and have now reappeared to move this deal forward. As you can imagine organizing several people to put this together is a bit like herding cats. I'm doing the best I can to assemble this PT group buy and need a minimum of 5 ready to order and willing buyers to do this deal. We are either there or real close.

I'm available to answer any questions and have made myself available via email, text and phone. Please visit Art Morrisons website and get familiar with the "add ons" you can include with your order and have a good idea what you would like to include in the order. As we narrow down your order and add ons, pricing will be done via email so it is documented properly.

This PT group buy is for 1st Gen Camaro/Firebird/Nova compatible frames only. AME won't do a Gen2 frame with the C6 control arms YET. If this this turns out well it may be a possibility in the future.

You are left to source your own C6 hubs, UCA and LCA's. You should be able to find these readily available online for around $500.

Add ons to consider are:
C6 Knuckle kit with steering arms OR Lateral Dynamics 1 inch drop Upright/Knuckle kit with steering arm
Steering rack
Sway bar
Prefab brake lines
Shocks & springs
Hardware kit
Tie rod ends
Trans mount
Rack Fittings
Steering U joint
Body Mount kit
Engine mounts
Stainless Headers


Please text or email me ASAP so we can renew our roll call to move forward.

Thank you,

Corey

[Tobin]

PM sent... Thanks!

[Cdog]

I'm getting some interest in firing up this group buy again. If you're serious about doing this frame deal text me to discuss. Do NOT PM me here. I don't check it very often. Last time I had to shelf the idea after 2 buyers of the 5 frames needed to fill the order with AM ghosted me and one guy went a different direction.

[Cdog]

So this deal never worked out but I did get a call from one of the shop AME guys that has a 70-81 frame that takes the C5/C6 control arms in storage that he personally wants to sell. Call or text me and I'll pass on his phone number so you can buy directly from him. I believe it's a bare frame.

Corey 714-Six58-Six291

[piratebaseball]

Anybody with a 67 bare frame that wants to sale? I'd love to be able to run c6 control arms on the camaro?

[dhutton]

Anybody with a 67 bare frame that wants to sale? I'd love to be able to run c6 control arms on the camaro?

You will need the custom machined spindles and custom steering arms too afaik.

Don

[Cdog]

You will need the custom machined spindles and custom steering arms too afaik.

Don

The uprights are stock with the arms cut off and a relief machined for the steering arm to fit flush. I have a set with the correct steering arms if you know anyone looking.

It's a bummer I never got enough guys to step up. With the change of leadership at AME we have the biggest opportunity to do this but couldn't get enough people to commit.