Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register



    Results 1 to 2 of 2
    1. #1
      Join Date
      Apr 2020
      Posts
      2

      '65 Galaxie Ridetech Air Suspension

      I have a 1965 Ford Galaxie and am looking for the best way to install front air suspension. Since the 1965 Galaxie normally has the shock inside the spring, and relocating the shock to the outside of the lower control arm and to the frame is impossible without cutting the frame, I've been looking at the ridetech 12162401 designed specifically for the 60-64 Galaxies.

      I'm sure I can make them work, but before I pull the trigger on a thousand dollar set of ridetech's, I'd like to know what the fully compressed height, and the fully inflated heights are for this particular set. I've searched Ridetech's site, Jegs, Summit, etc. and no one specifically states the heights. I've even emailed Ridetech themselves, but have not received an answer.



      I'm hoping someone on here has used them, or since Ridetech sponsors this particular forum, they could chime in and provide some insight.

      Thanks in advance!

      Chris


    2. #2
      Join Date
      Apr 2010
      Location
      Jersey Shore
      Posts
      695
      Country Flag: United States
      Call them... I had a similar tech question answered in less than 2 minutes just last week.
      -Chris
      '69 Corvette
      '55 Chevy Hardtop
      AutoWorks Middletown, NJ
      @autoworksnj for corvette and shop car pics
      https://www.pro-touring.com/showthre...e-Build-Thread



    Advertise on Pro-Touring.com