Results 1 to 9 of 9
Thread: HEIDTS IRS for 2nd gen camaro
-
02-26-2020 #1Registered User
- Join Date
- Feb 2020
- Posts
- 78
HEIDTS IRS for 2nd gen camaro
Hello, I was looking into rear suspension on my 75 camaro and found two IRS kits for my car, HEIDTS, and art morrison. I know someone uses the art morrison and they're fantastic, but has anyone used heidts? I know a good leaf setup does wonders but obviously if budget is not an issue then IRS is the next step up. Just want to know if anyone has experience with this set up and if they recommend it.
-
02-26-2020 #2Registered User
- Join Date
- Oct 2011
- Posts
- 696
I got their kit for a 69 Camaro. Great kit, very complete and very well built. Unfortunately I’m still not at the point of driving my car yet so I can’t comment on the handling.
There is a guy in latg that has the IRS setup on a 69 Camaro you can contact him directly as far as handling. Here is a link to his build:
https://lateral-g.net/forums/showthread.php?t=32076
Link to my build is below my signature. Feel free to ask me any specific questions you may haveMy Very Ambitious 69 Build
https://www.pro-touring.com/threads/...lls?highlight=
-
02-26-2020 #3Registered User
- Join Date
- Feb 2020
- Posts
- 78
Does this system limit what size rims you can use? because when I daily it I want to use 15" rims, but when I take it to the track I want to use larger ones for obvious reasons.
I know the art morrison one requires 17" at all times
It looks like the lower arm would hit the rim if you don't use a proper size and I don't see any tech info on their site
-
02-27-2020 #4Registered User
- Join Date
- Feb 2020
- Posts
- 78
I called them up for tech info
some 15" rims fit, and since it brings the axles in front stock you can put spacers on it anyways if needed (obviously not always recommended)
-
02-27-2020 #5