Parking brake cable routing

[derekf]

So I got the LT1 PBR rear disks mounted and I *think* the cable routing will work:




There's about 1/5" - 2" (height) between the LCA and the park cable. I was thinking to turn the sway bar bolts around and ziptie the cable to the LCA along the side/bottom.

How bad of an idea is all of this? Want to make sure I've got my calipers in their final location before I start making the lines.

[JustJohn]

Mine are routed similarly. Be very careful with cable length. Mine were too short the first time and suspension travel would essentially engage the parking brake.

[derekf]

Thanks John, I'd thought that might be an issue! (Also thank you spammer "matkaplay1" for not making me search for you)