Results 1 to 4 of 4
  1. #1
    Join Date
    Apr 2005
    Location
    Miami, FL
    Posts
    58

    Help Identifying Rear end

    Can anyone identify this rear end?
    It is a 12 bolt that I just took it out of my 1969 Camaro. It appears to be a posi and has a 4.11 gear ratio and the mounting flange holes match the std 12 bolt chevy pattern. I am changing brakes and am trying to figure out which WIlwood rear brakes set to order and I can't figure out what type of rear end this is.

    Attached Images Attached Images      
    Steve
    69 Camaro


  2. #2
    Join Date
    May 2010
    Location
    kitchener,Ontario,Canada
    Posts
    1,990
    Country Flag: Canada
    A body . I dont gm had run any other cars with triangulated 4 link and a 12 bolt ... maybe a B body . You need to take some measurements mounting flange to mounting flange
    Spinnin'my tires in life's fast lane

    Ryan Austin
    On twitter @raustinss
    On Instagram austinss70

  3. #3
    Join Date
    Apr 2005
    Location
    Miami, FL
    Posts
    58
    Thanks. This may point me in the right direction. Measurements flange to flange in 54 1/2". Total width of axle to end of tubes is 57". I'll check out the measures of B body axles.
    Steve
    69 Camaro

  4. #4
    Join Date
    Apr 2005
    Location
    Miami, FL
    Posts
    58
    I also measured the wheel mount to wheel mount and that is 60"
    Steve
    69 Camaro



Tags for this Thread