Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register



    Results 1 to 2 of 2
    1. #1
      Join Date
      Dec 2005
      Location
      TuoCo, CA
      Posts
      992
      Country Flag: United States

      Hyperspark Ignition Install

      I'm in the process of installing a Hyperspark Ignition on my SBC. I'm looking to put the CDI box near where the battery was located under the hood. The Hyperspark coil is HUGE and I'd rather not ugly up my firewall by mounting it there. My Terminator ECU is in the glove box. There's plenty of room down by the CDI box to mount the coil, but that would make for a pretty long coil wire. Does anyone see a problem having a long coil wire or have a better solution on where to mount this ugly coil?
      Steve
      '68 Camaro - SBC, TKO600, 3.73 Moser 12-bolt, Speedtech, ATS-AFX, Hotchkis, Forgeline, Ron Davis and C5 brakes (Kore3), Holley Terminator TBI.
      Check it Out Here

    2. #2
      Join Date
      Aug 2004
      Location
      Winters,Ca
      Posts
      23
      I mounted my hyperspark cdi and coil under my console on an aluminum plate and just ran the coil wire through the firewall. I have a 68 camaro with a 5th gen console





    Advertise on Pro-Touring.com