Results 1 to 9 of 9
Thread: T56 Magnum trouble
Threaded View
-
02-08-2020 #1
Registered User
- Join Date
- Nov 2014
- Posts
- 235
T56 Magnum trouble
Ok, here is a good one. The T56 Magnum in our 1st gen with NA LS3 pushed the rear seal out at the drag strip. No biggie. We pull frame stiffener, driveshaft, and replace the seal. Nothing appears to be abnormal. Put the car on the ground and it pushes the seal out again 2 blocks from the shop.
This car has been together for years, LOTS of miles logged without issue. Tranny and clutch seem fine and I grabbed the vent tube and it did not appear tight or pinched. Also the vent cap sounds to be free and rattles.
Before we yank this thing (yuck) I want to see if others have had issues similar to this. Thanks, Matt
-
Reply With Quote
