Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register



    Results 1 to 8 of 8
    1. #1
      Join Date
      Jul 2008
      Location
      milton, florida
      Posts
      487
      Country Flag: United States

      Skilled metal fabricator looking to relocate

      Hello , my name is Jim Dion and i have roughly 20 plus years in metal fabrication ,I am looking to relocate out of Florida and move somewhere around Gatlinburg area or close to it , not looking to go north anywhere, lower Tennessee is farthest i will move.

      I have roughly 20 years in metal fabrication and car/truck building . I have a lot of experience in building new bodies from new parts , I have built several body jigs to build new bodies on for Broncos and Camaro?Firebird.

      I have a lot of experience in building frames for 32 fords, pro street cars and pro touring rods.

      My house is almost ready to sell and its just me and my wife to move so its not going to be real hard to relocate, she has hew own business and does Camaro/Firebird Upholstery.

      I have tons and tons of pictures on my laptop of hot rods i have built , I also build steering columns, tilt and non tilt

      My current project that's almost finished is a Nascar truck reproduction of Mike Skinners 96 silverado , built from a 99 yukon 4 door and now its a unibody truck !

      PLease pm me for more info and i will send my phone #

      Jim

    2. #2
      Join Date
      Aug 2015
      Location
      charlotte
      Posts
      924
      Country Flag: United States
      I often see this position advertised on top end workshops Instagram pages, for example Twin state rod shops located in Mississippi is currently looking for a bodytech. But it also looks like most good shops are always looking and rarely finding fabricators, So perhaps It may be worth spending an hour and giving each a call as I feel like I see an advertisement each week. Hope this helps.

    3. #3
      Join Date
      Nov 2006
      Location
      Mountain Springs, Texas
      Posts
      4,488
      Country Flag: United States
      Check with Rob at No Limit Engineering.

      Don
      1969 Camaro - LSA 6L90E AME sub/IRS
      1957 Buick Estate Wagon
      1959 El Camino - Ironworks frame
      1956 Cameo - full C5 suspension/drivetrain
      1959 Apache Fleetside

    4. #4
      Join Date
      Aug 2015
      Location
      charlotte
      Posts
      924
      Country Flag: United States
      Also East bay muscle cars if you're up for a BIG move

    5. #5
      Join Date
      Jul 2008
      Location
      milton, florida
      Posts
      487
      Country Flag: United States
      to bad they are not in lower south carolina :(

      Quote Originally Posted by slimjim View Post
      Also East bay muscle cars if you're up for a BIG move

    6. #6
      Join Date
      Oct 2015
      Posts
      362
      Country Flag: United States
      I want to see this Tahoe/truck.
      My half a$$ed build thread.https://www.pro-touring.com/threads/...elle-6-0-4L60E

      Tighten it till it strips & back it off a quarter turn.

    7. #7
      Join Date
      Jul 2008
      Location
      milton, florida
      Posts
      487
      Country Flag: United States
      this is where its at now
      Attached Images Attached Images    

    8. #8
      Join Date
      Dec 2014
      Location
      Murfreesboro, Tennessee
      Posts
      134
      Country Flag: United States
      Quote Originally Posted by birdsandbowties View Post
      this is where its at now

      He did the paint and metal work on my car.

      https://drive.google.com/file/d/1aDA...ew?usp=sharing



      https://drive.google.com/file/d/1ao4...ew?usp=sharing

      1971 Firebird Formula 455HO 6 speed
      2017 GMC Sierra Denali Ultimate Pearl White 6.2L
      2013 GMC Sierra 5.3 6 Speed Pearl White, SLP 1.9L Supercharger(Sold)






    Advertise on Pro-Touring.com