Results 1 to 7 of 7

Hybrid View

  1. #1
    Join Date
    Jul 2008
    Location
    milton, florida
    Posts
    482
    Country Flag: United States

    Skilled metal fabricator looking to relocate

    Hello , my name is Jim Dion and i have roughly 20 plus years in metal fabrication ,I am looking to relocate out of Florida and move somewhere around Gatlinburg area or close to it , not looking to go north anywhere, lower Tennessee is farthest i will move.



    I have roughly 20 years in metal fabrication and car/truck building . I have a lot of experience in building new bodies from new parts , I have built several body jigs to build new bodies on for Broncos and Camaro?Firebird.

    I have a lot of experience in building frames for 32 fords, pro street cars and pro touring rods.

    My house is almost ready to sell and its just me and my wife to move so its not going to be real hard to relocate, she has hew own business and does Camaro/Firebird Upholstery.

    I have tons and tons of pictures on my laptop of hot rods i have built , I also build steering columns, tilt and non tilt

    My current project that's almost finished is a Nascar truck reproduction of Mike Skinners 96 silverado , built from a 99 yukon 4 door and now its a unibody truck !

    PLease pm me for more info and i will send my phone #

    Jim


  2. #2
    Join Date
    Aug 2015
    Location
    charlotte
    Posts
    738
    Country Flag: United States
    I often see this position advertised on top end workshops Instagram pages, for example Twin state rod shops located in Mississippi is currently looking for a bodytech. But it also looks like most good shops are always looking and rarely finding fabricators, So perhaps It may be worth spending an hour and giving each a call as I feel like I see an advertisement each week. Hope this helps.

  3. #3
    Join Date
    Nov 2006
    Location
    Mountain Springs, Texas
    Posts
    3,347
    Country Flag: United States
    Check with Rob at No Limit Engineering.

    Don
    1969 Camaro - LSA 6L90E AME sub/IRS
    1957 Buick Caballero - huge project
    1959 El Camino - Ironworks frame
    1969 Mustang Sportsroof
    1956 Cameo - full C5 suspension/drivetrain

  4. #4
    Join Date
    Aug 2015
    Location
    charlotte
    Posts
    738
    Country Flag: United States
    Also East bay muscle cars if you're up for a BIG move

  5. #5
    Join Date
    Jul 2008
    Location
    milton, florida
    Posts
    482
    Country Flag: United States
    to bad they are not in lower south carolina :(

    Quote Originally Posted by slimjim View Post
    Also East bay muscle cars if you're up for a BIG move

  6. #6
    Join Date
    Oct 2015
    Posts
    145
    Country Flag: United States
    I want to see this Tahoe/truck.
    My half a$$ed build thread.https://www.pro-touring.com/threads/...elle-6-0-4L60E

    Tighten it till it strips & back it off a quarter turn.

  7. #7
    Join Date
    Jul 2008
    Location
    milton, florida
    Posts
    482
    Country Flag: United States
    this is where its at now
    Attached Images Attached Images