Small bore LS7 racing engine

[k7king]

Complete engine and Dry sump setup
Ran 3 autocross events
[LEFT] Built to turn 8500 rpm
13:1 compression
563 HP at rear wheels
Former Daytona Prototype LS7 Block with roller camshaft bearings[COLOR=#1C1E21][FONT=inherit]
4.080 bore with nicosel coated cylinders
Jesel solid roller Lifters
Lunati Crank 3.622 stroke
Lunati Rods
JE custom pistons
Cam Motion cam .711 lift
Mast Ls7 heads with titanium Intake Inconel exhaust valves
T&D Machine Roller Rockers with stands
Dailey’s dry sump
Brown and Miller Racing hoses
Dry sump tank
Msd ported atomic Intake
Nick Williams 102mm DBW throttle body

[badazz81z28]

Interesting. So its essentially a LS3 now with LS7 induction?

[Josh@Ridetech]

Wicked setup and a good guy. I hope I see you out again soon Mike!

[Flash68]

Wicked!

Interesting. So its essentially a LS3 now with LS7 induction?

Pretty much

[redbull396]

Do you know Danny Popp by chance? If so, is this a similar set up to what he runs? His car is insane sounding with this setup.

[John McIntire]

Interested in the NW 102 if it's in good shape and you're willing to sell it separately.

[badazz81z28]

Do you know Danny Popp by chance? If so, is this a similar set up to what he runs? His car is insane sounding with this setup.

I want to say his LS7 is de-stroked. Same bore of the LS7 ~4.125 but w shorter stroke. I want to say ~388 cubes.

[Sbeck09]

I want to say his LS7 is de-stroked. Same bore of the LS7 ~4.125 but w shorter stroke. I want to say ~388 cubes.

That's correct. Just like DSE did on their 3rd gen. You get a little more power than this combo, but without the pedigree of the block available here.

[k7king]

For those asking about the engine. there is a video on me facebook page I do know Danny but I'm not sure exactly what his combo is> I think he runs 4.125 bore and 3.622 stroke but not for sure.

https://www.facebook.com/k7king/vide...type=3&theater

[k7king]

Sold