Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register



    Results 1 to 1 of 1
    1. #1
      Join Date
      Sep 2005
      Location
      Nor Cal
      Posts
      2,196
      Country Flag: United States

      1968 Camaro Widebody project for sale

      Item Location (City/State): Monroe, North Carolina

      Price: $40,000 for everything or $28,000 for car and $15,000 for SB2.2 engine

      Description:

      1968 Camaro Widebody Project

      437 cubic inch SB2.2
      Dyno'd at 795 horsepower and 641 ft lbs torque
      4.170 bore x 4.0 stroke
      13:1 CR -- E85
      Dart Little M block
      Joe Gibbs SB2.2 heads ported and flowed by Curtis Boggs @ Race Flow Development
      2.18 int 1.60 exh valves
      GM SB2.2 854 intake
      BME -12cc dished piston
      Callies Magnum XL crank
      Lunati billet Pro Mod rods 6"
      Auto Verdi 5 stage oil pump
      Bullet 264/274 @ .050, .390 lobe, 1.7 rockers, 113 LSA, 109 CL
      .904 Morel lifters
      Mark Sullens 950HP E85 carb
      1-3/4" to 2" to 2-1/8" stepped Tri-Y headers into 3.5" Collectors
      All machine work and assembly performed by Mike Blackstone at Watson Racing in Concord, CA

      G-Force/Tex Racing T101A 4 speed transmission
      REM polished gears
      2.26 / 1.54 / 1.29 / 1.0 ratios
      Hurst Super Shifter

      Tilton magnesium bellhousing
      Tilton 7.25" clutch with the "Danny Popp" Quartermaster dual disc Rallye Disc package

      Howe Ford 9" housing, Ford / Roush Yates 9" center section with Detroit Locker, 3.64 gears, G-Force internal pump, REM polished gears, and #40 internal locker springs

      Jim Pettigrew (20 year Nascar / Hendrick Motorsports fabricator) built full frame and roll cage (door bar setup to be determined and finished by buyer)
      C6 Control Arms, Spindles
      LG Motorsports C6 brake cooling duct plates
      Sweet Mfg power rack and pinion

      Jim Pettigrew custom built Torque Arm
      CorteX Racing watts link
      Speedway custom Sway Bars
      Bilstein coilovers
      Hypercoil springs


      Custom built Spintech 3.5" Mufflers with rocker panel exit

      Trans Am TA2 Spec Wing

      ATL 22 gallon fuel cell (SP122B) with -10 pickup, -8 return, -6 vent

      Nascar composite carbon fiber air box


      Woodward collapsible steering column

      NASCAR 4 gallon oil tank with 20AN breather

      AP Racing pedal box with master cylinders and reservoirs

      Butler Built Sportsman full containment Halo seat

      C&R Racing radiator with dual Spal fans with integrated oil and power steering heat exchangers

      Dynotech 4" driveshaft

      AP Racing C6 brakes front/rear - AP6000S and AP6050S - 14" slotted 2 piece

      Jongbloed Racing forged wheels
      18x12 front (315 or 335 front tire)
      18x13 rear (335 or 345 rear tire)


      Currently registered in CA (2020) with refurbished original Black Plates


      More parts are included that I am forgetting to help get it to the finish line but these are the major pieces. Needs sheetmetal work finished, roof skin, door bars to your liking, oil tank and lines, radiator mounted, plumbing and wiring. All major parts are there to get it together and running. Finish flares and aesthetics how you wish.

      This is the sister car to Payton King's SB2.2 68 Camaro which is nearing completion.

      I am in CA but everything is currently located at a shop in Monroe, NC (Charlotte area).

      Feel free to ask questions here, or contact me privately to discuss further at dwgordon at gmail or 415 three one four 8 thousand.



















      - - - Updated - - -

















      - - - Updated - - -

      Engine













      - - - Updated - - -

      Finally, what the sister car looks like that is nearing completion (Payton King's)









      1968 Camaro widebody project
      2004 Mustang LS2
      1964 Continental
      2014 Keezer




    Advertise on Pro-Touring.com