Results 1 to 7 of 7
Thread: Mann Hummel Pro Vent Plumbing
-
01-10-2020 #1Registered User
- Join Date
- Jan 2020
- Posts
- 9
Mann Hummel Pro Vent Plumbing
I have a 416 LS3 in my Camaro. Dart block and heads, Holley throttle body injection - 600hp. Currently the engine vents into a firewall mounted catch can (see catch can beside a/c firewall lines), with vent hoses plumbed off the back of the thick spacers which sit between the engine block and coil / valve covers on both banks, and thus both sides of the engine feed into the vented catch can - venting to the atmosphere.
I'd like to go to a Mann Hummel closed vent system, draining back into the sump and I am seeking plumbing advice.
Is the plumbing as simple as taking the existing hoses from each bank and plumbing them into the Mann Hummel Pro Vent 200 can; plus routing the Mann Hummel drain vent into the LS3 sump?